CET | BST |
|||
09:00 | 08:00 |
Welcome to ECCC2021 |
||
09:10 | 08:10 | Plenary Global Overview of the Energy Scene Dr Andrew Minchener OBE General Manager (IEACCC) UK |
||
09:30 | 08:30 | Plenary
Experiences on the Materials Service in the Chinese USC Power Plant |
||
09:50 | 08:50 |
Plenary |
||
10:10 | 09:10 |
Plenary |
||
10:30 | 09:30 | Plenary High Temperature Material Requirements for the Current and Next Generation of Nuclear Power Plants Dr. Hyeong-Yeon Lee Principal Investigator, Korea Atomic Energy Research Institute, Rep. of Korea |
||
10:50 | 09:50 | Break |
||
11:00 | 10:00 | Keynote Effects of Chemical Composition and Heat Treatment on Creep Properties of P91 Steel Base Metal M Yaguchi (CRIEPI) Japan |
||
11:20 | 10:20 | Keynote Recent Progress on the Modelling of Creep Cavitation, Deformation, and Creep Fracture Q Xu (University of Huddersfield) UK |
||
11:40 | 10:40 | Keynote Is it Time to Rehabilitate the Power Law? J M Brear (Plant Integrity) UK |
||
12:00 | 11:00 | Keynote Creep Rupture Ductility of Ferritic Creep Resistant Steels K Kimura (NIMS) Japan |
||
12:20 | 11:20 | Keynote Status of Writing a Comprehensive Engineering Composition About the Martensitic Steel Grad Family a Collaboration of VGB FDBR FVWHT and Research Institutes in Denmark and Germany M Bader (UNIPER) Germany |
||
12:40 | 11:40 | Keynote Effect of Segregation on Creep Strength in Grade 91 Steels K Sawada (NIMS) Japan |
||
13:00 | 12:00 | Keynote The 2019 ECCC Datasheet for Grade 91 – Using ECCC Recommendations to Resolve the Rupture Properties of an Industry Workhorse A Riva (Ansaldo Energis) Italy |
||
13:20 | 12:20 | Keynote The Assessment of Creep Rupture Properties for the ECCC 2019 Datasheet for Grade 92 C Bullough (GE) UK |
||
13:40 | 12:40 | Day 1 Closing Remarks A Di Gianfrancesco (Chair of ECCC) |
||
14:00 | 13:00 | End of Day 1 |
CET | BST | ||||
09:00 | 08:00 | Welcome A Di Gianfrancesco (Chair of ECCC) |
|||
Session 1A - Creep Strength Enhanced Ferritic Steels Chair: J Hald (MEK) Denmark |
Session 1B -Serviced & Exposed Materials Chair T. Kern (Siemens) Germany |
||||
09:10 | 08:10 |
Development of creep-resistant steels by self healing: from model alloys to more robust steel compositions - Yifan Fu (TUDelft) Netherlands |
Probablistic Creep-Fatigue: a plant component case study - Julian Booker (University of Bristol) UK | ||
09:20 | 08:20 |
Creep properties of ASTM A335 P92 pipe parent material and erection welded joint simulation: effect of 1 or 3 PWHT - Arianna Gotti (RINA-CSM) Italy |
Express Evaluation of Resource Characteristics of Metal of Pipeline Details - Vladimir Gladstein (VTI OJSC) | ||
09:30 | 08:30 |
Thor™115 pipes in Refinery Furnaces - R. Locatelli (Tenaris) | The Creep Strength of Aberrant Grade 91 Steel - Steve Brett (Consultant) UK |
||
09:40 | 08:40 |
Evolution of Precipitation Particles with Respect to Grain Boundary Energy in Grade 91 Steel during Creep Exposure - Yu Yamamoto (Tenaris) | Correlation of hardness with maximum allowable stresses and service / remaining lives of Grade 91 steel - Zhifang Peng (University of Wuhan) China |
||
09:50 | 08:50 |
Study on microstructural evolution of the cast MarBN steel during high temperature aging - An Chunxiang (SE) |
Issues and solutions for integrity of pressure vessels and piping subjected to long-term creep exposure in supercritical thermal plants and piping subjected to high-temperature operation in creep range - Hyeong-Yeon Lee (KAERI) | ||
10:00 | 09:10 | Effects of Chemical Composition and Heat Treatment on Creep Properties of P91 Steel Welded Joint - Masatsugu Yaguchi (CIEPI) | Metallic replica technique for residual life assessment for components serviced in creep regime - (RTMBreda) Italy | ||
10:10 | 09:10 |
Creep behaviour and microstructure changes of heat resistant steel P92 processed by severe plastic deformation - Petr Kral (IPM) |
Effects of abnormal structure on creep strength of long-term used 9Cr steel welded joint - Shengde Zhang (CRIEPI) | ||
10:20 | 09:20 |
Use of THOR®115 in design of new generation Combined cycle Power Plant - Antonella Ferrara (Tenaris) |
Operating parameters monitoring in pressure equipment working under creep range - Corrado Delle Site (INAIL) | ||
10:30 | 09:30 |
Mechanical Properties of CB2 Cross-Welds - Susanne Baumgartner (Voestalpine) |
Session 2B - Modelling/Special testing Chair M. Schwienheer (TU Darmstadt) Germany |
||
10:40 | 09:40 |
Effect of prior austenitisation temperature on void formation during creep in Grade 22 steel - Soraya Von Willingh (UCT) South Africa | Physical Background and Simulation of Creep in Steels - Stan Mandziej (CS) | ||
10:50 | 09:50 | Heavy wall forged pipes of grade 92: effect of heat treatment conditions on microstructure and creep resistance - Ettore Anelli (Franchini Acciai) | Fracture damage evolution and structural integrity assessment under creep-fatigue interaction - Valery Shlyannikov (FRC Kazan) Russia | ||
11:00 | 10:00 | Type IV creep crack initiation and propagation in mod.9Cr-1Mo steel welds - Takashi Honda (MHI) |
A Proposal and Methodology for the Accelerated Implementation of Probablistic Approaches in the Nuclear Sector - Julian Booker (University of Bristol) | ||
11:10 | 10:10 | CreeSo – Software for creep simulation of complex alloys - Gerold Zuderstorfer (TUGraz) | |||
11:20 |
10:20 |
Break
|
|||
11:30 | 10:30 | Session 2A - Austenitic & Nickel Alloys Chair E.Poggio (Ansaldo Energia) Italy |
Application of a physically-based dislocation creep model to P92 for constructing TTR diagrams - Florian Riedlsperger (TUGraz) | ||
11:40 | 10:40 |
Creep Deformation and Rupture Behavior of Pre-Strained Type 304 Stainless Steel - Haruhisa Shigeyama (CRIEPI) |
Creep analysis of a main steam pipe system - Jan Storesund (KIWA) | ||
11:50 | 10:50 |
Verification of Long-term Creep Rupture Properties and Microstructure Stability of Ni based Alloy 45Ni-24Fe-23Cr-7W-Ti Parent Metal and Weldment - Tsuyoshi Tokairin (MHI) |
Excessive Creep Strain Design Check with Simulations based on Material Properties from Material Standards - Franz Rauscher (TUWien) Austria | ||
12:00 | 11:00 | Short-term creep behaviour of Additive Manufactured Hastelloy X material - Evy De Bruycker (Engie) |
The influence of an evolving multiaxial stress on small punch creep of a nickel superalloy - Will Harrison (University of Swansea) | ||
12:10 | 11:10 |
Constitutive Description of Creep Behaviour of Nuclear Grade 316L SS with Varying Nitrogen Content - Prasad Reddy (IGCAR) |
Computational Fluid Dynamics Informed Finite Element Creep-Fatigue Analysis of Power Plant Components - Chris Hyde (University of Nottingham) | ||
12:20 | 11:20 |
Thermal ageing and creep damage in 316(N) alloys: a 3D analysis - Oguz Berk Ozdemir (INP) |
Reliability of API 530 for creep life prediction of long service exposed 9Cr-1Mo steel tubes - Reza Khadem Hosseini (RIPI) | ||
12:30 | 11:30 |
Microstructural Characterisation of Advanced Austenitic Stainless Steel Super 304H - Charlotte Pulsford (University of Loughborough) | A Continuum Damage Mechanics approach to model stress relaxation and its relationship with primary creep and anelastic recovery - Dario Ripamonti (CNR-ICMATE) |
||
12:40 | 11:40 |
The new ECCC Datasheet for Alloy 617: multi-regime models to cover a wide range of temperature - Andrea Riva (Ansaldo Energia) |
Computational Fluid Dynamics Informed Finite Element Creep-Fatigue Analysis of Power Plant Components - Chris Hyde (University of Nottingham) | ||
12:50 | 11:50 |
Creep behavior and microstructural Evolution for TP347H Austenite Steel used in China plants - Chang Che (SINA) |
Extrapolation Methods: Development, Application and Validation of Novel Methods, Part 2 - Magdalena Speicher (University of Stuttgart) Germany | ||
13:00 | 12:00 | Creep Rupture Properties of ATI 718Plus – An Approach to Assessing Sparse Data - Chris Bullough (GE) |
New approaches to determine negligible creep - Stefan Holmström (SCK CEN) Belgium | ||
13:10 | 12:10 |
The creep and fracture behavior of additively manufactured Inconel 625 and 718 - Kwangtae Son (USC) |
Estimation of uniaxal and creep properties by small punch testing in support of ECCC test programmes - Stefan Holmström (SCK CEN) Belgium | ||
13:20 | 12:20 | Effect of solution heat treatment temperature on creep rupture strength of 18Cr-9Ni-3Cu-Nb-N steel - Keita Hashimoto (MHI) |
Development of a new Small Punch Creep Testing machine - Sergio Budano (Compusystem) Italy | ||
13:30 | 12:30 | Closing Remarks A Di Gianfrancesco (Chair of ECCC) |
|||
13:40 | 12:40 |
End of Conference |
Click to download ECCC 2021 Abstracts Booklet