Science and Technology of Welding and Joining, Vol. 28, No. 4, out now
With papers on the Natural aging of heterogeneous arc-welded AA6061-AA7075 joints with nanocomposite filler, a Study of laser directed energy deposition of Inconel 625 and austenitic steel, and Rapid in situ wetting measurement for nanosolder by electron beam irradiation.
This new issue contains the following articles, which are available to members via My IOM3.
Natural aging of heterogeneous arc-welded AA6061-AA7075 joints with nanocomposite filler
Narayanan Murali, Shiqi Zheng, Yitian Chi & Xiaochun Li
Pages: 249-258
DOI: 10.1080/13621718.2022.2148066
Determining the weldability window based on the interface morphologies formed during high-speed collision in magnetic pulse welding
Jishuai Li, Rijia Nirina Raoelison, Thaneshan Sapanathan & Mohamed Rachik
Pages: 259-267
DOI: 10.1080/13621718.2022.2151733
Microstructure, mechanical and electrochemical properties of wire-arc additively manufactured duplex stainless steel
Aobo Liu, Bangzhao Yin, Di Zhang & Peng Wen
Pages: 268-276
DOI: 10.1080/13621718.2022.2151766
Effects of bypass-current and out plasma current on droplet transfer behaviours during plasma-MIG hybrid arc welding
Yugang Miao, Ziran Wang, Lin Wang, Xubo Ma, Qingwen Deng & Benshun Zhang
Pages: 277-286
DOI: 10.1080/13621718.2022.2153998
Study of laser directed energy deposition of Inconel 625 and austenitic steel
Nehem Tudu, Mayuri Baruah & Shashi Bhushan Prasad
Pages: 287-297
DOI: 10.1080/13621718.2022.2156715
Rapid in situ wetting measurement for nanosolder by electron beam irradiation
Xuan Zhang & Wei Zhang
Pages: 298-304
DOI: 10.1080/13621718.2022.2158280
Development of 16Cr8Ni low transformation temperature welding material for optimal characteristics under various dilutions due to all repair welding positions
Zhongyuan Feng, Ninshu Ma, Kazuo Hiraoka, Yuichi Komizo, Satoru Kano & Masayuki Nagami
Pages: 305-313
DOI: 10.1080/13621718.2022.2158282
Characterisation of structural modifications on cold-formed AA2024 substrates by wire arc additive manufacturing
Mathias Silmbroth, Norbert Enzinger, Christian Schneider-Bröskamp, Aurel Arnoldt & Thomas Klein Pages: 314-322
DOI: 10.1080/13621718.2022.2160902
Quality monitoring of projection welding using machine learning with small data sets
Johannes Koal, Tim Hertzschuch, Martin Baumgarten, Jörg Zschetzsche & Uwe Füssel
Pages: 323-330
DOI: 10.1080/13621718.2022.2162709
