Powder Metallurgy, Vol. 65, No. 4, out now
This issue looks at the influence of heating rate on sintering shrinkage of plain iron, sintering anisotropy and magnetic performance of high silicon steel.
This issue contains the following articles, which are available to members via My IOM3.
Influence of the heating rate on sintering shrinkage of plain iron
Silvia Baselli & Alberto Molinari
Pages: 265-272
DOI: 10.1080/00325899.2021.2015860
Sintering anisotropy of binder jetted 316L stainless steel: part I – sintering anisotropy
Alberto Cabo Rios, Eduard Hryha, Eugene Olevsky & Peter Harlin
Pages: 273-282
DOI: 10.1080/00325899.2021.2020485
Sintering anisotropy of binder jetted 316L stainless steel: part II – microstructure evolution during sintering
Alberto Cabo Rios, Eduard Hryha, Eugene Olevsky & Peter Harlin
Pages: 283-295
DOI: 10.1080/00325899.2021.2020486
Magnetic performance and microstructure characterisation of powder metallurgy Fe–6.5 wt-% Si high-silicon steel
Qian Qin, Guangbang Li, Fang Yang, Pei Li, Cunguang Chen, Junjie Hao & Zhimeng Guo
Pages: 296-307
DOI: 10.1080/00325899.2021.2014650
Microstructure characteristics and surface oxidation behaviour of SLM
WC/IN718 composite
Yanlin Wang, Longchao Zhuo, Min Liu, Zhanjun An, Chao Li, Enhuai Yin, Jinwen Lu & Xiufang Gong
Pages: 308-317
DOI: 10.1080/00325899.2021.2014649
Novel testing device and routine to characterise the spreadability of powders for powder bed fusion processes – a problem-oriented approach
Marco Mitterlehner, Herbert Danninger, Christian Gierl–Mayer, Johannes Frank, Wolfgang Tomischko & Harald Gschiel
Pages: 318-334
DOI: 10.1080/00325899.2021.2023414
Effect of solution treatment on microstructure and properties of 00Cr32Ni7Mo3.5N
Yang Zhao, Jianhao Chen, Meihuan Qi, Shubin Ren & Xuanhui Qu
Pages: 335-346
DOI: 10.1080/00325899.2021.2014656
Effect of Ti and B additions on the microstructure and properties of FeCoCrNi high entropy alloys prepared by hot pressing
Yichen Zhang, Yanru Yang, Jifeng Zhang, Jiawen Li, Heguo Zhu & Zonghan Xie
Pages: 347-352
DOI: 10.1080/00325899.2022.2029302
