Materials Science and Technology, Vol. 36, No. 13

Materials Science & Technology Division
,
18 Aug 2020

Materials Science and Technology, Vol. 36, No. 13 is now available online. Members can access the content via our Member Portal.

 

The influence of cryogenic rolling on a transformation-induced plasticity steel

Zhiping Hu, Rendong Liu, Li Lin & Guodong Wang

Pages: 1381-1388

DOI: 10.1080/02670836.2020.1783617

 

Thermal desorption spectroscopy evaluation of hydrogen-induced damage and deformation-induced defects

Aurélie Laureys, Lisa Claeys, Margot Pinson, Tom Depover & Kim Verbeken

Pages: 1389-1397

DOI: 10.1080/02670836.2020.1783618

 

Acicular ferrite nucleation and growth in API5L-X65 steel submerged arc welded joints

Javad Mollaei Milani & Tohid Saeid

Pages: 1398-1406

DOI: 10.1080/02670836.2020.1783774

 

Microstructural investigations on simulated intercritical heat-affected zone of boron modified P91-steel

Akhil Khajuria, Modassir Akhtar, Raman Bedi, Rajneesh Kumar, Mainak Ghosh, C. R. Das & Shaju K. Albert

Pages: 1407-1418

DOI: 10.1080/02670836.2020.1784543

 

Effects of TiC formation on the microstructure and hardness of wear-resistant steel

Yongfu Wang, Changlin Yang, Jianbin Li, Yifei Wang, Feng Liu, XiaoKai Liang & Xinjun Sun

Pages: 1419-1430

DOI: 10.1080/02670836.2020.1785092

 

Enhancement of pearlite transformation by Warm Rolling in 1.0C-1.5Cr Steel

Xiao-Yu Zhao, Xian-Ming Zhao, Huai-Bin Han, Chun-Yu Dong & Yang Yang

Pages: 1431-1439

DOI: 10.1080/02670836.2020.1790096

 

Simulation of coarsening of inter-lath cementite in a Q&T steel during tempering

Yulin Ju, Claire Davis & Martin Strangwood

Pages: 1440-1456

DOI: 10.1080/02670836.2020.1790097

 

Creep behaviour of equiaxed fine-grain γ-TiAl-based alloy prepared by powder metallurgy

Zhenxin Duan, Ying Han, Xiaolei Song & Hua Chen

Pages: 1457-1464

DOI: 10.1080/02670836.2020.1790098

 

Influence of deformation process on microstructure and properties of 2014 aluminium alloy

Fushan Li, Songyi Chen, Kanghua Chen, Lanping Huang, Longlong He & Geng Chen

Pages: 1465-1475

DOI: 10.1080/02670836.2020.1791447

 

Investigation on formability of three-layer joined Al/Cu/Al sheets annealed at different temperature

Milad Roostaei & Roya Darabi

Pages: 1476-1486

DOI: 10.1080/02670836.2020.1792637

 

Uncertainty analysis and reliability estimation of clamp band joints

Ali Davar, Reza Azarafza & Seyed Sadredin Mousavi

Pages: 1487-1502

DOI: 10.1080/02670836.2020.1795375

 

Inducing ferromagnetism in surface stabilised intrinsic CdSe nanoparticles by a simple process

Sumit Pokhriyal & Somnath Biswas

Pages: 1503-1506

DOI: 10.1080/02670836.2020.1795407