Ironmaking & Steelmaking, Vol. 47, No. 5 available

The Iron & Steel Society
23 Jul 2020

Ironmaking & Steelmaking, Vol. 47, No. 5, is now available online. Members have free access tot he papers beloe via our Member Portal.


Steel World editorial 2020

N. A. McPherson

Pages: 459-459

DOI: 10.1080/03019233.2020.1775396


Casting powders: influence of the humidity on the flowability

Christian Schadauer, Gerald R. Martetschläger, Aura L. Ilie, Albert Angerbauer & Christof Lanzerstorfer

Pages: 460-463

DOI: 10.1080/03019233.2020.1725730


Lowering iron losses during slag removal in hot metal desulphurisation without using fluoride

Frank N. H. Schrama, Fuzhong Ji, Adam Hunt, Elisabeth M. Beunder, Rhian Woolf, Alison Tuling, Peter Warren, Jilt Sietsma, Rob Boom & Yongxiang Yang

Pages: 464-472

DOI: 10.1080/03019233.2020.1747778  


New method for estimating the economic penalties of ferrous scraps in the steelmaking industry due to material degradation during its storage in scrap yards

Asier Vicente, Artzai Picon & Estibaliz Barco

Pages: 473-481

DOI: 10.1080/03019233.2020.1748433


Numerical modelling and experimental casting of 17%Mn–4%Al–3%Si–0.45%C wt-% TWIP steel via the horizontal single belt casting (HSBC) process

Usman Niaz, Mihaiela Minea Isac & R.I.L. Guthrie

Pages: 482-495

DOI: 10.1080/03019233.2020.1731253


Control of as-cast microstructure morphology of high silicon electrical steels produced through a horizontal belt casting process simulator

Carl Slater, Mo Ji, Bharath Bandi & Claire Davis

Pages: 496-503

DOI: 10.1080/03019233.2020.1758995


Effect of niobium on microstructure and precipitation in As-annealed Sanicro 25 steel

Sheng-Yao Huang, Jui-Chao Kuo, Wen-Ta Tsai, Dong-Yih Lin & Yeong-Tsuen Pan

Pages: 504-511

DOI: 10.1080/03019233.2018.1540524


Smart-shifting strategy of work rolls for downstream stands in hot rolling

Hainan He, Xiaochen Wang, Quan Yang, Xijia Sun, Jiale Xiao, Yang Liu & Guangyi Song

Pages: 512-519

DOI: 10.1080/03019233.2018.1541656


The function of blast furnace dust as reductant on simultaneous reduction of high-phosphorus oolitic hematite

Yun-ye Cao, Dong-ping Duan, E. Zhou & Ti-chang Sun

Pages: 520-530

DOI: 10.1080/03019233.2018.1544781


Simulation and application of coherent supersonic jet with low calorific value fuel gas in EAF steelmaking

Kai Dong & Guangsheng Wei

Pages: 531-539

DOI: 10.1080/03019233.2018.1549852


An analytical approach to measure OEE for blast furnaces

Arunabh Bhattacharjee, Shoumodip Roy, Subhashis Kundu, Mayank Tiwary & Ranjan Chakraborty

Pages: 540-544

DOI: 10.1080/03019233.2018.1554348


Titanium distribution between blast furnace slag and iron for blast furnace linings protection

Jian Sun, Shuai Wang, Mansheng Chu, Mao Chen, Zhixing Zhao, Baojun Zhao & Zhenggen Liu

Pages: 545-552

DOI: 10.1080/03019233.2018.1557847


Modelling and simulation of strip running deviation in continuous annealing process

R. Wang, Y. Li, Z.H. Bai, Y.T. Lv, C.J. Su & X.D. Jia

Pages: 553-560

DOI: 10.1080/03019233.2018.1560998


Prediction of blast furnace hearth condition: part II – a transient state simulation of hearth condition during blast furnace shutdown

X. F. Dong, P. Zulli & M. Biasutti

Pages: 561-566

DOI: 10.1080/03019233.2018.1561386


Combined effect of MgO and basicity varied by different dolomite and burnt lime addition on sintering performance of magnetite concentrates

Benjing Shi, Deqing Zhu, Jian Pan, Xinqi Liu & Siwei Li

Pages: 567-573

DOI: 10.1080/03019233.2019.1565151


Suitability of pulverised coal testing facilities for blast furnace applications

Markus Bösenhofer, Eva-Maria Wartha, Christian Jordan, Christoph Feilmayr, Hugo Stocker, Franz Hauzenberger, Johannes Rieger, Stefan Tjaden, Arleen Walk & Michael Harasek

Pages: 574-585

DOI: 10.1080/03019233.2019.1565152