Ironmaking & Steelmaking, Vol. 47, No. 8 now available
This new journal issue covers oxidation and induration of Hongge vanadium titanomagnetite pellets, the effect of welding parameters on the properties of mild steel joints and mathematical modelling of slag–metal reactions.
This issue contains the following articles, members can access the papers without charge:
Influence of MgO on the oxidation and induration of Hongge vanadium titanomagnetite pellets
Wei Li, Guiqin Fu, Mansheng Chu & Miaoyong Zhu
Pages: 837-843
DOI: 10.1080/03019233.2019.1615815
Effect of welding parameters on mechanical and microstructural properties of GMAW and SMAW mild steel joints
Bijaya Kumar Khamari, Soumya Sobhan Dash, Swapan Kumar Karak & Bibhuti Bhusan Biswal
Pages: 844-851
DOI: 10.1080/03019233.2019.1623592
Analyses of CWF (CaFe3O5) phase formation in lime-magnetite pellets
S. Purohit, G. Brooks, M. A. Rhamdhani, M. I. Pownceby & N. A. S. Webster
Pages: 852-864
DOI: 10.1080/03019233.2019.1623594
Effect of a two-phase region annealing process on microstructure and
mechanical properties of medium manganese steel
Lifeng Fan, Sai Li, Yan Zhao, Liying Jia & Jianzhong He
Pages: 865-872
DOI: 10.1080/03019233.2019.1627806
Mathematical modelling of slag–metal reactions and desulphurization behaviour in gas-stirred ladle based on the DPM-VOF coupled model
Qing Cao & Laurentiu Nastac
Pages: 873-881
DOI: 10.1080/03019233.2019.1629155
Comprehensive CFD modelling of reduction behaviour inside coal-based composite pellets
Chenghong Liu, Xueyong Ding, Jingxin Dai, Zhaohui Tang & Yue Dong
Pages: 882-891
DOI: 10.1080/03019233.2019.1629207
Phosphorus vaporization behaviour from converter slag
Y. K. Xue, D. G. Zhao, S. H. Wang, C. X. Li & R. H. Guo
Pages: 892-898
DOI: 10.1080/03019233.2019.1630214
Automated break temperature determination of mould slags for the continuous casting of steel based on temperature-dependent viscosity data
Nathalie Kölbl & Harald Harmuth
Pages: 899-902
DOI: 10.1080/03019233.2019.1639028
Nonmetallic LD slag fines – opportunities by invoking chemistry
Shrenivas Ashrit, Santanu Sarkar, Ravikrishna V. Chatti, Chandramouli Sarkar & Supriya Sarkar
Pages: 903-907
DOI: 10.1080/03019233.2019.1641679
Effective preparation of blast furnace burdens from superfine iron concentrates by composite agglomeration process
F. Q. Gu, Y. B. Zhang, G. H. Li, Q. Zhong, J. Luo, Z. J. Su, M. J. Rao, Z. W. Peng & T. Jiang
Pages: 908-914
DOI: 10.1080/03019233.2019.1641681
Numerical simulation on gas–liquid multiphase flow in hot metal ladle with top submerged lance
Xin Wang, Shu-guo Zheng & Miao-yong Zhu
Pages: 915-924
DOI: 10.1080/03019233.2019.1644037
Effect of plastic range and ash chemistry on hot strength properties of coke
Praveen K. Jha, Pramod K. Singh, Santosh Kushwaha, K. K. Manjhi & G. S. V. Subramanian
Pages: 925-928
DOI: 10.1080/03019233.2019.1645798
Influence of mould curvature on the metallurgical performances of beam blank continuous casting
Wei Wang, Wang Su, Jian-hua Liu, Jin-bao Yan, Heng Cui & Fu-liang Wang
Pages: 929-941
DOI: 10.1080/03019233.2019.1645803
Height of water pool above lower roll in slab casting
Somayeh Khani, Heinz Palkowski & Klaus Schwerdtfeger
Pages: 942-947
DOI: 10.1080/03019233.2019.1645804
Comparative studies on isothermal and non-isothermal reduction of haematite in carbon monoxide atmosphere
A. A. El-Geassy, M. I. Nasr, S. M. El-Raghy & A. A. Hammam
Pages: 948-957