Science and Technology of Welding and Joining Vol. 30, No. 2, available

Ultrasonic additive manufacturing and computer-aided design models are among the topics discussed.

IOM3 members have free online access (login required) to this and other journals published on behalf of IOM3 by Sage.

Fabricating a martensitic steel layer through double-wire arc directed energy deposition for in-situ cladding
Haoyu Kong, Yibo Liu, Chenyu Song, Qinghua Zhang, Qi Sun, Yongqing Zhao, Qingjie Sun
pp. 89–96
DOI: 10.1177/13621718251323309

Analytical model for estimation of interface weld strength in ultrasonic additive manufacturing (UAM) of similar and dissimilar tempered aluminum alloy 6061 (AA6061)
Muzamil Ali, M. Bryant Gingerich, Leon M. Headings, Marcelo J. Dapino
pp. 97–104
DOI: 10.1177/13621718241298519

Initial stress-based residual stress and distortion computation for part scale laser powder bed fusion
Kajal Khan, Amitava De
pp. 105–117
DOI: 10.1177/13621718241307465

Quality improvement in resistance spot welding of H1000 austenitic stainless steel using an external magnetic field
Qiaobo Feng, Yunwu Ma, Qingxin Zhang, Stan A. David, Yongbing Li
pp. 118–128
DOI: 10.1177/13621718241308375

Modelling wetting angle of solder on substrate using machine learning approach
Bing-Xi Lee, Yu-chen Liu
pp. 129–138
DOI: 10.1177/13621718241310935

Corrosion behaviour of 6016 aluminium/steel resistance spot welding joints in salt spray environment
Xian-Ming Meng, Xuan Shi, Tao Li, Sai Zhang, Cong-Qian Cheng, Xiao-Zhong Wu, Xue-Na Zhang, Tie-Shan Cao, Jie Zhao
pp. 139–147
DOI: 10.1177/13621718251319111

Seamless heat transfer analysis for part scale laser powder bed fusion by harnessing the computer-aided design model with an analytical thermal model
B K Barik, P Zagade, B P Gautham, A De
pp. 148–161
DOI: 10.1177/13621718251320202

Obituary: Celebrating Dr Nobutaka Yurioka, a metallurgical engineer extraordinaire
pp. 162
DOI: 10.1177/13621718251319949