Mineral Processing and Extractive Metallurgy, Vol. 130, No. 4, now available

Flotation, elecrowinning, leaching and concentration are discussed.

This issue contains the following articles, which are available to members via My IOM3.

Refractory gold ores and concentrates part 2: gold mineralisation and deportment in flotation concentrates and bio-oxidised products

Richmond K. Asamoah, Massimiliano Zanin, William Skinner & Jonas Addai-Mensah

Pages: 269-282

DOI: 10.1080/25726641.2019.1626660

Pelletization characteristics of artificial and natural magnetite and their mixtures

Manman Lu, Hanquan Zhang, Hong Yu & Zeqiang Zhang

Pages: 283-291

DOI: 10.1080/25726641.2019.1626661

Characterisation and separation of pyritic sulfur from limestone using Falcon concentrator

Subrata Roy & Amit Chatterjee

Pages: 292-301

DOI: 10.1080/25726641.2019.1633500

Distribution of vanadium between Al2O3-CaO-MgO-SiO2-TiO2 slag and carbon saturated iron

Steven Wright & Rowan Davidson

Pages: 302-312

DOI: 10.1080/25726641.2019.1633505

Distribution of Co, Fe, Ni, and precious metals between blister copper and white metal

Keiran Holland, Dmitry Sukhomlinov, Lassi Klemettinen, Petri Latostenmaa, Hugh O’Brien, Ari Jokilaakso & Pekka Taskinen

Pages: 313-323

DOI: 10.1080/25726641.2019.1643129

Development of a process to produce manganese nanomaterials from low grade ferruginous manganese ores

Veerendra Singh, Soobhankar Pati & Kishan Kumar

Pages: 324-331

DOI: 10.1080/25726641.2019.1643130

Modelling of pilot scale vertical roller mill operated in overflow mode

Deniz Altun & Hakan Benzer

Pages: 332-340

DOI: 10.1080/25726641.2019.1643132

Bauxite residue sinter leach process – phases formation, reaction pathways and kinetics

Harrison Hodge, Matthew R. Rowles, Peter C. Hayes, William Hawker & James Vaughan

Pages: 341-353

DOI: 10.1080/25726641.2019.1644778

Lithium recovery from mechanically activated mixtures of lepidolite and sodium sulfate

Nader Setoudeh, Ataollah Nosrati & Nicholas J. Welham

Pages: 354-361

DOI: 10.1080/25726641.2019.1649112

Comparative investigation of leaching of zinc from wastes of the zinc alloy production process

Hassan Koohestani, Elahe Sadat Khatami & Kazem Babaei

Pages: 362-368

DOI: 10.1080/25726641.2019.1660506

Investigation of microwave reduction of low-grade banded iron ores

Veeranjaneyulu Rayapudi & Nikhil Dhawan

Pages: 369-377

DOI: 10.1080/25726641.2019.1668662

Dissolution of copper and nickel from nickel-rich anode slimes under oxidized pressure leaching

Udit S. Mohanty, Taina Kalliomäki, Sipi Seisko, Chao Peng, Lotta

Rintala, Petteri Halli, Jari Aromaa, Pekka Taskinen & Mari Lundström

Pages: 378-387

DOI: 10.1080/25726641.2019.1670008

Effect of electrolytic composition on current efficiency and alloy composition in electrowinning of Pr-Mg alloys using chloride electrolyte

D. K. Sahoo, M. Anitha, D.K. Singh & V. Kain

Pages: 388-395

DOI: 10.1080/25726641.2019.1677076

Artificial neural network modeling and experimental investigation to characterize the dewatering performance of a hydrocyclone

Sunati Mohanty, Suchandan K. Das & A. K. Majumder

Pages: 396-408

DOI: 10.1080/25726641.2019.1680177

Solid state reduction of Iranian titanomagnetite concentrate optimization and study

Soroush Poyanfar & Masoud Askari

Pages: 409-415

DOI: 10.1080/25726641.2019.1698852

Microwave infrared ore sorting of screen rejected rocks based on their content of iron and copper sulfide in Sarcheshmeh copper complex, Iran, Kerman

Reza Naseh & Abbas Sam

Pages: 416-424

DOI: 10.1080/25726641.2019.1699359

Investigation of the reduction roasting of saprolite ores in the Caron process: reaction mechanisms and reduction kinetics

J. Chen, E. Jak & P. C. Hayes

Pages: 425-432

DOI: 10.1080/25726641.2019.1699362

Process principles in minerals and materials production – with a focus on metal production and recycling (4th ed.) by P. C. Hayes, 2021

Markus A. Reuter

Pages: 433-434

DOI: 10.1080/25726641.2021.1995997

Correction

Pages: 435-435

DOI: 10.1080/25726641.2021.1982211