Materials Science and Technology, Vol. 39, No. 3, ready to read

Containing a review of simple shear extrusion as an efficient severe plastic deformation technique, and various papers on microstructure effects.

This issue contains the following articles, which are available to members via My IOM3.

Simple shear extrusion as an efficient severe plastic deformation technique: a review Ramin Ebrahimi & Faraz Rahimzadeh Lotfabad
Pages: 259-282
DOI: 10.1080/02670836.2022.2111115

Microstructure evaluation and thermal deformation behaviours of wrought magnesium alloys
Fanxiao Kong, Weidong Xie, Guobing Wei, Zhenduo Ma, Hao Chen & Chao Fan
Pages: 283-299
DOI: 10.1080/02670836.2022.2110374

Improving the wear and corrosion resistance of martensitic stainless steel by paste boriding treatment
Mingxiao Shi, Jingyong Li, Weidong Mao, Shengliang Li, Zhidong Yang & Xiang Ma Pages: 300-309
DOI: 10.1080/02670836.2022.2110392

Quantifying geometrically necessary dislocation with surface roughness effect in copper (111) under indentation
Weng Mei Kok, Hun Guan Chuah, Heoy Geok How, Yew Heng Teoh, Hooi Min Yee & Wei Hong Tan
Pages: 310-320
DOI: 10.1080/02670836.2022.2110700

Deformation responses of AZ31B magnesium alloy under combined shear-compression loading
Hui Lin, Lin Lv, Lidong Shao & Tao Jin
Pages: 321-326
DOI: 10.1080/02670836.2022.2110716

Characteristics of advanced high-strength steels obtained by the compact strip production route
Francisco A. Pérez-González, Javier H. Ramírez-Ramírez, Luis E. Hernández, Miguel A. Quiñones, Nelson F. Garza-Montes-de-Oca & Rafael Colás
Pages: 327-337
DOI: 10.1080/02670836.2022.2111116

Indentation size effect in steels with different carbon contents and microstructures
Soumya Sourav Sarangi, Avala Lavakumar, Prince Kumar Singh, Prvan Kumar Katiyar & Ranjit Kumar Ray
Pages: 338-346
DOI: 10.1080/02670836.2022.2113157

Effect of Cr addition on the γ′ strengthened CoNiCrAlMo compositionally complex alloy
Prafull Pandey, Mangesh V. Pantawane, Nithin Baler, Raju Ravi, Surendra Kumar Makineni & Kamanio Chattopadhyay
Pages: 347-361
DOI: 10.1080/02670836.2022.2114615

Ellipsoidal equiaxial grain of 7055 aluminium alloy in vacuum centrifugal casting
Li Yong, Wang Yin, Qian Xiao-Ming, Zhang Bo-si & Wang Zhao-dong
Pages: 362-368
DOI: 10.1080/02670836.2022.2115648

Utilisation of steel slag as welding flux and its chemical and thermal characterisation
Sumit Saini & Kulwant Singh
Pages: 369-380
DOI: 10.1080/02670836.2022.2116528

Effects of Al on microstructure and mechanical properties of hot-extruded Mg–3Nd alloys
Peichen Yu, Lei Wang, Liping Wang, Yicheng Feng, Yuanke Fu, Sicong Zhao, Erjun Guo & Zhiwei Wang
Pages: 381-391
DOI: 10.1080/02670836.2022.2116873

Copper plating on bonding properties of aluminium/steel explosive welded composite plate
Zhixiong Bi, Xuejiao Li, Ke Yang, Quan Wang, Rong Kai & Xiande Dai
Pages: 392-402
DOI: 10.1080/02670836.2022.2116874