15 August 2022

Materials Science and Technology, Vol. 38, No. 14, out now

Including free spark plasma sintering for textured ceramics, electroplating under perpendicular magnetic fields, and adiabatic shear behaviour of AZ31 alloy with different grain sizes.

Bridge in Singapore
© Katherine McCormack/Unsplash

This issue contains the following articles, which are available to members via My IOM3.

Corrosion behaviour induced by crystal structure transformation of Mg alloy with AlTiB

Yan Tang, Zhisheng Nong, Hongliang Zhang, Qichi Le & Baolin Wu

Pages: 1021-1028

DOI: 10.1080/02670836.2022.2068290

Highly textured TiN ceramic prepared by edge-free spark plasma sintering

Shengkai Wang, Bangzhi Ge, Jiabin Hu, Wenqi Xie, Yi Liu, Shunjian Xu & Zhongqi Shi

Pages: 1029-1036

DOI: 10.1080/02670836.2022.2069213

Response of Ti6321 titanium alloy at different strain rates under tensile loading

Zhiwei Yan, Lin Wang, Xuefeng Xu, Zhe Zhou, Anjin Liu & Zixuan Ning

Pages: 1037-1045

DOI: 10.1080/02670836.2022.2069317

The electroplating process of zinc–nickel system under perpendicular magnetic field from chloride bath

Naima Benachour, Sabiha Chouchane & Jean-Paul Chopart

Pages: 1046-1055

DOI: 10.1080/02670836.2022.2069655

Effects of anisotropy and pre-strain on the shear fatigue behaviour of DP600 steel

Zhongran Zhang, Zhenming Yue, Yanmei Bao & Jun Gao

Pages: 1056-1069

DOI: 10.1080/02670836.2022.2070108

Adiabatic shear behaviour of AZ31 alloy with different grain size under high-strain-rate

E. Yuqing, Pingli Mao, Xuanyu Liu, Xiaoxu Wu, Feng Wang, Zhi Wang, Le Zhou & Zheng Liu

Pages: 1070-1080

DOI: 10.1080/02670836.2022.2070109

Microstructural influences on fatigue crack initiation and early propagation in Ni-based superalloy

Donghyuk Kim, Rong Jiang, Ian Sinclair & Philippa Reed

Pages: 1081-1094

DOI: 10.1080/02670836.2022.2070336

Surface modification by in-situ grown TiC in the bainitic matrix using TIG arcing

Nilesh Kumar Paraye, Anish Karmakar, Prakriti Kumar Ghosh & Sourav Das

Pages: 1095-1109

DOI: 10.1080/02670836.2022.2070966

Precipitation behaviour of single and duplex aged metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr

Deepak Sharma, David Parfitt, Bryan Roebuck, Sitarama Raju Kada, Daniel Fabijanic & Michael E. Fitzpatrick

Pages: 1110-1117

DOI: 10.1080/02670836.2022.2071397

The effect of porosity on the mechanical properties of Ti–8Nb–8Zr–8Cu alloy

Huseyin Demirtas

Pages: 1118-1126

DOI: 10.1080/02670836.2022.2081447

Microstructural evolution in CoCrFeNi and CoCrCuFeNi alloys processed by autogenous fusion welding

A. Verma & Shanmugasundaram Thangaraju

Pages: 1127-1133

DOI: 10.1080/02670836.2022.2071398

Effect of strontium on microstructure, mechanical, and biological responses of Mg–Al–Zn–Sr alloys

Tapendu Mandal, Shalini Dasgupta, Ananya Barui & Sukumar Kundu

Pages: 1134-1150

DOI: 10.1080/02670836.2022.2072071