Materials Science and Technology, Vol. 37, No. 1 out now
This new journal issue focuses on alloys.
This issue is available to members via My IOM3 and contains the following articles:
Study of novel, thermally resistant Mg alloy with dual-phase
Yan Tang, Zhisheng Nong, Baolin Wu & Rongzheng Xu
Pages: 1-5
DOI: 10.1080/02670836.2020.1859711
Residual strain–stress in manganese steel railway crossing determined by synchrotron and laboratory X-rays
Somrita Dhar, Hilmar K. Danielsen, Ruqing Xu, Yubin Zhang, Flemming Bjerg Grumsen, Carsten Rasmussen & Dorte Juul Jensen
Pages: 6-13
DOI: 10.1080/02670836.2020.1852749
High strain rate deformation mechanism of Mg–2.5Zn–4Y magnesium alloy containing LPSO phase
Guoxin Wang, Pingli Mao, Zhi Wang, Le Zhou, Feng Wang & Zheng Liu
Pages: 14-22
DOI: 10.1080/02670836.2020.1855799
Processing, microstructure, properties and fracture behaviour of Ti–6Al–4V manufactured from pre-alloyed powder
Ajit Pal Singh, Brian Gabbitas, Ian W. M. Brown & Aamir Mukhtar
Pages: 23-32
DOI: 10.1080/02670836.2020.1858601
Fabrication and damping property of a novel Zn–Al–Ag–Sc alloy
Jianjun Zhang, Dianlong Yu, Qingzhou Wang, Zhixian Jiao, Yafei Liu, Haoyuan Niu & Fuxing Yin
Pages: 33-41
DOI: 10.1080/02670836.2020.1861735
Influence of vanadium, boron and titanium on hot ductility of high Al, TWIP steels
S. E. Kang, M. H. Kang & B. Mintz
Pages: 42-58
DOI: 10.1080/02670836.2020.1861736
In-situ studies and simulation of equiaxed solidification in Al–20Cu alloy
Shifeng Luo, Guangyu Yang, Jieming Chen, Lei Xiao, Wanxia Huang, Qingxi Yuan & Wanqi Jie
Pages: 59-65
DOI: 10.1080/02670836.2020.1863305
Mechanical properties enhancement of Mg–4Si in-situ composites by friction stir processing
R. Taghiabadi & A. Moharami
Pages: 66-77
DOI: 10.1080/02670836.2020.1866848
The influence of post-annealing and ultrasonic vibration on the formability of multilayered Al5052/MgAZ31B composite
D. Rahmatabadi, M. Tayyebi, N. Najafizadeh, R. Hashemi & M. Rajabi
Pages: 78-85
DOI: 10.1080/02670836.2020.1867784
Microstructure, tensile and bending behaviour of the as-cast AM50 alloy modified with different antimony and copper additions
Seyed Mohamadreza Bagherzadeh hoseini, Mehdi Malekan, Massoud Emamy & Mehrab Lotfpour
Pages: 86-102
DOI: 10.1080/02670836.2020.1866847
Mechanical response of a metastable austenitic stainless steel under different deformation modes
A. Zergani, H. Mirzadeh & R. Mahmudi
Pages: 103-109
DOI: 10.1080/02670836.2020.1868104
Effect of filler metal chemical composition on the TiAl/IN738 dissimilar brazed joint
D. Kokabi, A. Kaflou & H. R. Rastifard
Pages: 110-120
DOI: 10.1080/02670836.2020.1868676