Ironmaking & Steelmaking, Vol. 48, No. 3, ready to read

With papers examining the influence of burner nozzle configuration, and inlet gas composition on combustion, gas dynamics, temperature and concentration profile in a rotary hearth furnace, the effect of coaxial oxygen enrichment on three different coals and their blends and Prediction of the cohesive zone in a blast furnace by integrating CFD and SVM modelling and more.

This new issue contains the following articles, which are available to members via My IOM3.

Influence of burner nozzle configuration, and inlet gas composition on combustion, gas dynamics, temperature and concentration profile in a rotary hearth furnace

Sooraj Saleem & Gour Gopal Roy

Pages: 229-241

DOI: 10.1080/03019233.2020.1758998

Effect of coaxial oxygen enrichment on three different coals and their blends

Diego Silva de Deus Vieira, Leandro Rocha Lemos & Geraldo Raimundo da Silva Pereira

Pages: 242-253

DOI: 10.1080/03019233.2020.1762387

Research on twin-roll strip cast-rolling based on a new sectional roll surface heat transfer boundary condition

M. H. Sun, S. P. Guo, L. K. Zheng, C. X. Zheng & F. S. Du

Pages: 254-262

DOI: 10.1080/03019233.2020.1762388

An image analysis-based method for automatic data extraction from pilot draining experiments

Weiqiang Liu, Debanga Nandan Mondal, Alf Hermanson, Lei Shao & Henrik Saxén

Pages: 263-274

DOI: 10.1080/03019233.2020.1767395

Sulphide capacity prediction of CaO–SiO2–MgO–Al2O3 slag system by using regularized extreme learning machine

Zi-Cheng Xin, Jiang-Shan Zhang, Wen-Hui Lin, Jun-Guo Zhang, Yu Jin, Jin Zheng, Jia-Feng Cui & Qing Liu

Pages: 275-283

DOI: 10.1080/03019233.2020.1771892

Prediction of the cohesive zone in a blast furnace by integrating CFD and SVM modelling

Jialing Li, Rongjia Zhu, Ping Zhou, Yan-po Song & Chenn Q. Zhou

Pages: 284-291

DOI: 10.1080/03019233.2020.1771893

Effect of modified MgO aggregates on mechanical properties of magnesium aluminate spinel refractories

Shihang Ma, Kai Shi, Yi Xia, Yi Zhang & Xiaoyuan Han

Pages: 292-298

DOI: 10.1080/03019233.2020.1772588

Effect of impurity oxides on CWF (CaFe3O5) formation in lime magnetite pellets – part I: thermodynamic assessments and experimental investigations

S. Purohit, G. Brooks, M. A. Rhamdhani, M. I. Pownceby & N. A. S. Webster

Pages: 299-312

DOI: 10.1080/03019233.2020.1774222

Effect of impurity oxides on CWF (CaFe3O5) formation in lime magnetite pellets – part II: microstructural analysis and physical and mechanical testing

S. Purohit, G. Brooks, M. A. Rhamdhani, M. I. Pownceby & A. Torpy

Pages: 313-323

DOI: 10.1080/03019233.2020.1774251

Numerical simulation of co-injection of pulverized coal and blast furnace gas separated by a membrane

Lili Jiang, Yuanshou Zhao, Yimin Meng, Sihao Tu, Zhaoyu Chen, Haitao Yu & Xingang Hou

Pages: 324-333

DOI: 10.1080/03019233.2020.1777514

Influence of slag temperature on phosphorus enrichment in P-bearing steelmaking slag

Lu Lin, Ya-Qin Liu, Jian-Guo Zhi, Sai He, Xiang Li, Zhong-Xiao Hou &

Li-Qiang Zhang

Pages: 334-342

DOI: 10.1080/03019233.2020.1780366

Analysis of critical slag entrapment speed at the steel–slag interface

Huajie Wu, Yinghui Liu, Yue Sun, Fangjie Jiang, Qiaoqi Li & Hongbiao Dong

Pages: 343-350

DOI: 10.1080/03019233.2020.1780367

Microstructure and wear mechanism of high-strength steels for concrete mixing drum coiled at different temperatures

Yueyao Wang, Zhengzhi Zhao, Jianzhong Xue, Mingbo Zhang, Kuo Bao & Chunlei Zhang

Pages: 351-358

DOI: 10.1080/03019233.2020.1786643