Corrosion Engineering, Science and Technology, Vol. 56, No. 6, ready to read

Featuring EUROCORR, analysis of corrosion behaviour and the effects of outdoor exposure in a coastal environment.

This new issue contains the following articles, which are available to members via My IOM3.

EUROCORR 2020: ‘closing the gap between industry and academia in corrosion science and prediction’: part 4

D. Nuttall & D. J. Mills

Pages: 497-503

DOI: 10.1080/1478422X.2021.1960781

Influence of melt treatment of AZ91D alloy on phase morphology and corrosion behaviour in Hank's solution

J. Grilo, H. Puga & J. C. S. Fernandes

Pages: 504-512

DOI: 10.1080/1478422X.2021.1916688

Isothermal and cyclic corrosion behaviour of Ni-based alloys in an electrochemical reduction process

Hwa-Young Woo, Gyu-Seok Lim, Wan-Bae Kim, Woo-Seok Choi, Soo-Haeng Cho, Kyoung-Tae Park & Jong-Hyeon Lee

Pages: 513-521

DOI: 10.1080/1478422X.2021.1916689

Ten years outdoor exposure of steel in an urban and coastal tropical atmosphere

Juan A. Jaén, Kevin Guzmán, Josefina Iglesias & Griselda Caballero Manrique

Pages: 522-529

DOI: 10.1080/1478422X.2021.1917864

Effects of Ga addition on the corrosion behaviours of high strain rate rolled Mg–Ga alloy sheets

Xiuxiu Yan, Jihua Chen, Hongge Yan, Weijun Xia, Bin Su, Hui Yin & Wensen Huang

Pages: 530-542

DOI: 10.1080/1478422X.2021.1918839

Corrosion behaviour of X60 steel in the presence of sulphate-reducing bacteria (SRB) and iron-reducing bacteria (IRB) in seawater

Sara Taghavi Kalajahi, Behnam Rasekh, Fatemeh Yazdian, Jaber Neshati & Lobat Taghavi

Pages: 543-552

DOI: 10.1080/1478422X.2021.1919840

The role of acetic acid in FeCO3 scale deposition on CO2 corrosion of API X65 carbon steel under high temperatures

Bernardo Augusto Farah Santos, Rhuan Costa Souza, Maria Eduarda Dias Serenario, Eugenio Pena Mendes Junior, Thiago Araujo Simões, Jefferson  Rodrigues de Oliveira, Gustavo Leitão Vaz, Lecino Caldeira, Jose Antonio da Cunha Ponciano Gomes & Alysson Helton Santos Bueno

Pages: 553-564

DOI: 10.1080/1478422X.2021.1920171

Influence of additive manufacturing by laser powder bed fusion on the susceptibility of Alloy 718 to hydrogen embrittlement

J. Hesketh, N. McClelland, Y. Zhang, C. Green & A. Turnbull

Pages: 565-574

DOI: 10.1080/1478422X.2021.1921336

Role of La addition for enhancing the corrosion resistance of Mg–Dy alloy

A. Prasad, Y. L. Chiu, I. P. Jones, S. S. Singh, N. N. Gosvami & J. Jain

Pages: 575-583

DOI: 10.1080/1478422X.2021.1922811

Microstructure, mechanical properties and corrosion fatigue behaviour of biodegradable Mg–Zn–Y–Nd alloy prepared by double extrusion

Jinming Wang, Jun Wang, Qinyuan Fu, Kun Sheng, Mengyao Liu, Yufeng Sun, Di Mei, Yage Kou, Shijie Zhu & Shaokang Guan

Pages: 584-593

DOI: 10.1080/1478422X.2021.1923178

https://www.tandfonline.com/doi/abs/10.1080/1478422X.2021.1923178?ai=1xjs5&ui=95z5g&af=T

Effects of Cr content on the corrosion behaviour of porous Ni–Cr–Mo–Cu alloys

Xide Li, Junsheng Yang, Yangdon Hu, Haoran Zou, Chuo Zhang, Yuzuo Liu, Lieqiang Xiong & Jianping Ye

Pages: 594-603

DOI: 10.1080/1478422X.2021.1927496