Advances in Applied Ceramics Vol. 122, No. 5-8, out now

Including a look at the Effect of Sr2+doping on the microwave dielectric properties of BaZrO3 ceramics, Sintering, microstructure, and mechanical properties of ZrO2-doped Al2O3 and Enhanced densification and ionic conductivity of LLZO by flash sintering.

This issue contains the following articles, which are available to members via My IOM3.

From stoichiometric to non-stoichiometric high-entropy carbide: a case study of hafnium addition
Yuan Qin, Xiao-Feng Wei, Ji-Xuan Liu, Yongcheng Liang & Guo-Jun Zhang
Pages: 259-265
DOI: 10.1080/17436753.2023.2243120

Impact of Er substitution on the properties of NdFeO3: structural, magnetic and microwave absorption
Qihua Liang, Haowen Zhang, Zhaofei Tong, Jinxiang Guo, Man Wang, Qingrong Yao & Huaiying Zhou
Pages: 266-275
DOI: 10.1080/17436753.2023.2243427

An overview of oxidation in hybrid and glass-based protective coatings for thermoelectric materials for medium-temperature range applications
F. D’Isanto, F. Smeacetto, M. J. Reece & M. Salvo
Pages: 276-286
DOI: 10.1080/17436753.2023.2246000

Effect of Sr2+doping on the microwave dielectric properties of BaZrO3 ceramics
Dewei Cui & Hui Shao
Pages: 287-294
DOI: 10.1080/17436753.2023.2247682

Time dependent deformation of LaCoO3 based perovskites at different temperatures: ferroelastic and non-ferroelastic creep behaviour
M. Lugovy, M. Bondar, N. Orlovskaya, M.J. Reece, T. Graule & G. Blugan
Pages: 295-310
DOI: 10.1080/17436753.2023.2262277

Sintering, microstructure, and mechanical properties of ZrO2-doped Al2O3
Biswajit Baruah, Rahul Anand & Shantanu K. Behera
Pages: 311-321
DOI: 10.1080/17436753.2023.2265191

Preparation of porous ceramsite from municipal sludge and its structure characteristics
Junping Meng, Zhenxiao Cui, Chandrasekar Srinivasakannan, Xinhui Duan, Jinsheng Liang, Guangyan Tian, Zhiling Yang & Xiangying Wei
Pages: 322-335
DOI: 10.1080/17436753.2023.2265192

Enhanced densification and ionic conductivity of LLZO by flash sintering
Amirreza Sazvar, Hossein Sarpoolaky & Mohammad Golmohammad
Pages: 336-346
DOI: 10.1080/17436753.2023.2265193


Influences on the mechanical and physical properties of hot-press moulding alkali-activated slag (HP-FRAASC) composite with various fibers
Haonian Wang, Lixin Xu, Sirui Zang, Dajian Huang, Song Wang, Qing Guo,
Jiale Yang & Changjun Jiang
Pages: 347-363
DOI: 10.1080/17436753.2023.2265194

3D-printed porous Al2O3 membrane coated with hydrophilic modified titanium dioxide particles for large-flux oil/water separation
Hao Li, Hui Mei, Zhipeng Jin, Longkai Pan, Laifei Cheng & Litong Zhang
Pages: 364-374
DOI: 10.1080/17436753.2023.2265203

Gel-casting for manufacturing porous alumina ceramics with complex shapes for transpiration cooling
Y. Belrhiti, P. Kerth, M. McGilvray & L. Vandeperre
Pages: 375-380
DOI: 10.1080/17436753.2023.2265204