Advances in Applied Ceramics Vol. 122, No. 3-4, out now

This is a special Issue on Advanced Ceramics and Coatings for Wear and Corrosion Applications.

This issue contains the following articles, which are available to members via My IOM3.

Eugene Medvedovski
Pages: 79-80
DOI: 10.1080/17436753.2023.2268436  

A comprehensive review of modern engineered ceramics coatings for optimised resistance to wear and corrosion
Douglas E. Wolfe, Caillin J. Ryan, Christopher M. DeSalle, Sergei P. Stepanoff, Benjamin I. Aronson, Zachary M. Boring, Justin A. Reiss, Patrick E. Albert, Jackson K. Nicastro & Aaron P. Fjeldsted
Pages: 81-100
DOI: 10.1080/17436753.2023.2235497

Development of environmental barrier coatings for non-oxide ceramics
Shunkichi Ueno & Tatsuki Ohji
Pages: 101-106
DOI: 10.1080/17436753.2023.2238980

Highly wear resistant dual-phase (Ti-Zr-Nb-Hf-Ta)C/(Ti-Zr-Nb-Hf-Ta) B2 high-entropy ceramics
Annamária Naughton-Duszová, Dávid Medveď, Lenka Ďaková, Alexandra Kovalčíková, Peter Švec, Peter Tatarko, Hakan Ünsal, Pavol Hvizdoš,
Pavol Šajgalík & Ján Dusza
Pages: 107-118
DOI: 10.1080/17436753.2023.2238160

The volume erosion rate of the slip cast monolithic and composite ceramics
Lidija Ćurković, Darko Landek, Zrinka Švagelj & Ivana Gabelica
Pages: 119-128
DOI: 10.1080/17436753.2023.2235491

Kinetics investigation of alumina ceramics corrosion in nitric acid
Lidija Ćurković, Ivana Ropuš, Ivana Gabelica & Sanda Rončević
Pages: 129-136
DOI: 10.1080/17436753.2023.2230675

Wear behaviour of alumina-toughened-zirconia composites with different phase arrangement under ball-on-flat tribological tests
Marek Grabowy, Agnieszka Wojteczko, Piotr Osada, Grzegorz Wiązania & Zbigniew Pędzich
Pages: 137-144
DOI: 10.1080/17436753.2023.2246270

Enamel (glassy) coatings for steel protection against high temperature corrosion
Eugene Medvedovski & Gerardo Leal Mendoza
Pages: 145-169
DOI: 10.1080/17436753.2023.2231699

The design and selection of tungsten carbide-based composite overlays for aggressive wear service conditions
Gary Fisher & Daniela Diaz
Pages: 170-180
DOI: 10.1080/17436753.2023.2236888

Localised surface modification of high-strength aluminium–alumina metal matrix composite coatings using cold spraying and friction stir processing
Wania Jibran, Priti Wanjara, Javad Gholipour Baradari, Maria Ophelia Jarligo & André McDonald
Pages: 181-196
DOI: 10.1080/17436753.2023.2227446

CuCr2O4 particle growth and evolution across sol–gel routes and calcination profiles
J. Billman, I. E. Reimanis, A. Ambrosini & G. Jackson
Pages: 197-214
DOI: 10.1080/17436753.2023.2233242

Improving mechanical properties of carbon and tool steels via chromizing
Tomas Grejtak & Jun Qu
Pages: 215-225
DOI: 10.1080/17436753.2023.2238987

Surfactant assisted dip-coating method for deposition of polyethylmethacrylate-diamond coatings
Zhengzheng Wang & Igor Zhitomirsky
Pages: 226-235
DOI: 10.1080/17436753.2023.2230008

In vitro tribocorrosion evaluation of carbide-derived carbon (CDC) for hip implants
Yani Sun, Kyle Kinnerk, Tony Mirshed, Michael McNallan & Mathew Mathew
Pages: 236-249
DOI: 10.1080/17436753.2023.2241251

Rapid evaluation of the particle-erosion resistance of Al2O3 ceramics, composites, and coatings using a resonant acoustic mixer
Peter Mechnich & Gözde Alkan
Pages: 250-257
DOI: 10.1080/17436753.2023.2231230