Advances in Applied Ceramics, Vol. 120, No. 1, out now

With papers examining an olive biomass ash-based geopolymer composite, the brazing joints of tubular zirconia ceramics and the magnetic properties of a non-stoichiometric oxynitride.

This new issue contains the following articles. All are available to IOM3 members via My IOM3.

Olive biomass ash-based geopolymer composite: development and characterisation

Yaser Jaradat & Faris Matalkah

Pages: 1-9

DOI: 10.1080/17436753.2020.1839848

Analysis of the brazing joints of tubular zirconia ceramics and 06Cr19Ni10 stainless steel tubes

Mao Tang, Wenjing Chen & Yan Liu

Pages: 10-16

DOI: 10.1080/17436753.2020.1840265

Effects of Al2O3 platelet and VC additive on sintering and mechanical properties of WC-based composites by hot pressing

Weiwei Dong, Shigen Zhu, Bin Han, Bowen Fan, Ze Sun, Yilan Luo & Yunfeng Bai

Pages: 17-23

DOI: 10.1080/17436753.2020.1840266

Biomorphic SiC: porous SiC and ultrafine SiC powder formation through biomimicking route

Gulnar Abdul Karim, Abhijit Ghosh, Rekha Rao & Madangopal Krishnan

Pages: 24-31

DOI: 10.1080/17436753.2020.1842106

Effect of the distribution of lip-shaped matrix cracks in continuous fibre reinforced ceramic matrix composites on failure progress under transverse tension

Li Xiangping, Chen Xi, Zhang Hong & Liu Guangcheng

Pages: 32-46

DOI: 10.1080/17436753.2020.1854146

Multi-scale decomposition enhancement algorithm for surface defect images of Si3N4 ceramic bearing balls based on stationary wavelet transform

Dongling Yu, Zuoxiang Zhu, Jianliang Min, Changfu Fang, Dahai Liao & Nanxing Wu

Pages: 47-57

DOI: 10.1080/17436753.2020.1858010

Rapid synthesis, structure, and magnetic properties of the non-stoichiometric oxynitride EuTaO1.75N1.25

Shiya Ye, Duan Li, Liang Zeng, Junsheng Li & Feng Cao

Pages: 58-62

DOI: 10.1080/17436753.2020.1858011