Materials at High Temperatures Microscopy of Oxidation 10

High Temperature Materials Committee
,
8 Mar 2018

Materials at High Temperatures Microscopy of Oxidation 10 is now available online. IOM3 members have access to the papers below via our journals page.

 

Microscopy of Oxidation 10

Gordon J Tatlock & Hugh E Evans

Pages: 1-1

DOI: 10.1080/09603409.2017.1419604

 

3D evaluation of the oxidation and porosity in 9Cr tubing using FIB and X-ray

A. T. Fry, D. M. Gorman & S. B. Brown

Pages: 2-13

DOI: 10.1080/09603409.2017.1389099

 

Observation of crack microstructure in oxides and its correlation to oxidation and hydrogen-uptake by 3D FIB Tomography – case of Zr-ZrO2 in reactor

A. Baris, S. Abolhassani, Y. L. Chiu & H. E. Evans

Pages: 14-21

DOI: 10.1080/09603409.2017.1392412

 

Effects of Si, Mn, and water vapour on the microstructure of protective scales grown on Fe–20Cr in CO2 gas

Thuan Dinh Nguyen, Alexandre La Fontaine, Julie M. Cairney, Jianqiang

Zhang & David J. Young

Pages: 22-29

DOI: 10.1080/09603409.2017.1389098

 

Oxidation behaviour of steels in advanced gas cooled reactors

Aya Shin, Marc Chevalier, Eleanor Laney & Jonathan Pearson

Pages: 30-38

DOI: 10.1080/09603409.2017.1389114

 

Characterization of chromia scales formed in supercritical carbon dioxide

B. A. Pint, K. A. Unocic, R. G. Brese & J. R. Keiser

Pages: 39-49

DOI: 10.1080/09603409.2017.1389371

 

A study of breakaway oxidation of 9Cr–1Mo steel in a Hot CO2 atmosphere using Raman spectroscopy

C. Liu, P. J. Heard, S. J. Greenwell & P. E. J. Flewitt

Pages: 50-55

DOI: 10.1080/09603409.2017.1389424

 

An investigation on oxidation/carburisation of 9Cr-1Mo steel heat exchanger tube in an AGR environment

Sabrina Yan, Scott Doak, Rachel Thomson & Rebecca Higginson

Pages: 56-65

DOI: 10.1080/09603409.2017.1392411

 

Alumina formation and microstructural changes of aluminized CoNiCrAlY coating during high temperature exposure in the temperature range 925°C–1075°C

A. Jalowicka, D. Naumenko, M. Ernsberger, R. Herzog & W. J. Quadakkers

Pages: 66-77

DOI: 10.1080/09603409.2017.1392114

 

Predicting the microstructural evolution in a multi-layered corrosion resistant coating on a Ni-base superalloy

R. Pillai, M. P. Taylor, T. Galiullin, A. Chyrkin, E. Wessel, H. Evans & W. J. Quadakkers

Pages: 78-88

DOI: 10.1080/09603409.2017.1396650

 

Oxidation behaviour of synthetic stainless steel interdiffusion layers

K. Balinski, K. Jahns, M. Schroth, S. Bursich, J. Salime, S. Impey, C. Chalk, J. Wübbelmann, J. R. Nicholls & U. Krupp

Pages: 89-96

DOI: 10.1080/09603409.2018.1435203

 

Effect of test atmosphere composition on high-temperature oxidation behaviour of CoNiCrAlY coatings produced from conventional and ODS powders

T. Huang, J. Bergholz, G. Mauer, R. Vassen, D. Naumenko & W. J. Quadakkers

Pages: 97-107

DOI: 10.1080/09603409.2017.1389422

 

High-temperature behavior of oxide dispersion strengthening CoNiCrAlY

K. A. Unocic, J. Bergholz, T. Huang, D. Naumenko, B. A. Pint, R. Vaßen & W. J. Quadakkers

Pages: 108-119

DOI: 10.1080/09603409.2017.1389423

 

Stress corrosion of Ni-based superalloys

L. Brooking, J. Sumner, S. Gray & N. J. Simms

Pages: 120-129

DOI: 10.1080/09603409.2017.1392414

 

The effect of elevated air pressure on the oxidation properties of the nickel-based superalloy, RR1000, at 650°C with different surface modifications

T. D. Reynolds, M. P. Taylor, D. J. Child & H. E. Evans

Pages: 130-140

DOI: 10.1080/09603409.2017.1389132

 

High temperature isothermal oxidation behaviour of an oxide dispersion strengthened derivative of IN625

Keith Arnold, Gordon Tatlock, Christoph Kenel, Alberto Colella & Paolo Matteazzi

Pages: 141-150

DOI: 10.1080/09603409.2017.1393145

 

Corrosion fatigue testing: the combined effect of stress and high temperature corrosion

Neil Chapman, Laurie Brooking, Joy Sumner, Simon Gray & John Nicholls

Pages: 151-158

DOI: 10.1080/09603409.2017.1389100

 

About the control of semiconducting properties of chromia: investigation using photoelectrochemistry and orientation mapping in a TEM

L. Latu-Romain, Y. Parsa, M. Ollivier, S. Mathieu, M. Vilasi, G. Renou, F. Robaut & Y. Wouters

Pages: 159-167

DOI: 10.1080/09603409.2017.1389113

 

Effect of microalloying with silicon on high temperature oxidation resistance of novel refractory high-entropy alloy Ta-Mo-Cr-Ti-Al

Franz Müller, Bronislava Gorr, Hans-Jürgen Christ, Hans Chen, Alexander Kauffmann & Martin Heilmaier

Pages: 168-176

DOI: 10.1080/09603409.2017.1389115

 

The effect of Ni additions on the oxidation behaviour of Co–Re–Cr high-temperature alloys

K. Esleben, B. Gorr, H.-J. Christ, D. Mukherji & J. Rösler

Pages: 177-186

DOI: 10.1080/09603409.2017.1392111

 

Oxidation behaviour of an intermetallic Ti–Al–Cr–Zr bond coat on a γ–TiAl based TNB alloy with 7YSZ thermal barrier coating

Nadine Laska, Philipp Watermeyer, Lisa Koliotassis & Reinhold Braun

Pages: 187-194

DOI: 10.1080/09603409.2017.1404691

 

PVD thermal barrier coating systems for Mo–Si–B alloys

A. Lange, R. Braun & U. Schulz

Pages: 195-203

DOI: 10.1080/09603409.2017.1404686

 

The oxidation behaviour of aluminium-rich coatings on the TiAl alloy TNM-B1

A. S. Ulrich, N. Laska, A. Straubel, C. Leyens, R. Braun, M. C. Galetz & M. Schütze

Pages: 204-216

DOI: 10.1080/09603409.2017.1389097

 

The effect of recycling on the oxygen distribution in Ti-6Al-4V powder for additive manufacturing

Yu Sun, Mark Aindow & Rainer J. Hebert

Pages: 217-224

DOI: 10.1080/09603409.2017.1389133

 

Hot corrosion: a modification of reactants causing degradation

David A. Shifler

Pages: 225-235

DOI: 10.1080/09603409.2017.1404692

 

The role of superalloy precipitates on the early stages of oxidation and type II hot corrosion

A. Potter, J. Sumner & N. J. Simms

Pages: 236-242

DOI: 10.1080/09603409.2017.1392413

 

Effect of microstructure on KCl corrosion attack of modified AISI 310 steel

Yohanes Chekol Malede, Melanie Montgomery, Kristian Vinter Dahl & John Hald

Pages: 243-254

DOI: 10.1080/09603409.2017.1389381

 

Microstructural investigations of Ni and Ni2Al3 coatings exposed in biomass power plants

D. L. Wu, K. V. Dahl, T. L. Christiansen, M. Montgomery & J. Hald

Pages: 255-266

DOI: 10.1080/09603409.2017.1389382

 

Characterization of pack cemented Ni2Al3 coating exposed to KCl(s) induced corrosion at 600 °C

K. V. Dahl, A. Slomian, T. N. Lomholt, S. Kiamehr, F. B. Grumsen, M. Montgomery & T. Jonsson

Pages: 267-274

DOI: 10.1080/09603409.2017.1392112

 

Corrosion behavior of candidate heat exchanger materials in oxidizing and reducing gases relevant to oxyfuel power plants

P. Huczkowski, S. Najima, A. Chyrkin, D. Grüner & W. J. Quadakkers

Pages: 275-290

DOI: 10.1080/09603409.2017.1392113

 

The effect of thermal cycling on steam oxidation behaviour of TP347H FG at 650 °C

R.-L. Mobbs, S. Osgerby, M. P. Taylor & H. E. Evans

Pages: 291-298

DOI: 10.1080/09603409.2017.1389380

 

Impacts of temperature and surface finish upon steam oxidation of austenitic steel TP347HFG

J. Bouvet, J. Sumner & N. J. Simms

Pages: 299-308

DOI: 10.1080/09603409.2017.1404685