Science and Technology of Welding and Joining, Vol. 28, No. 5, out now

Featuring a review of the effect of surface oxide layers in solid-state welding of aluminium alloys, a statistical analysis of residual stresses in austenitic pipe girth welds and Monitoring melt pool asymmetry in gas metal arc-directed energy deposition.

This issue contains the following articles, which are available to members via My IOM3.

Effect of surface oxide layers in solid-state welding of aluminium alloys – review
Danka Labus Zlatanovic, Jean Pierre Bergmann, Sebastian Balos, Jörg Hildebrand, Mirjana Bojanic-Sejat & Saurav Goel
Pages: 331-351
DOI: 10.1080/13621718.2023.2165603

Process stability and forming accuracy on wire arc additive manufactured Al–Zn–Mg–Cu alloy with different electrode positive/electrode negative ratios of CMT advance process
Yuwen Wang, Ji Chen, Maoai Chen, Hao Su, Wenbin Zhang & Chuansong Wu
Pages: 352-361
DOI: 10.1080/13621718.2022.2162712

Numerical study of beam oscillation and its effect on the solidification parameters and grain morphology in remote laser welding of high-strength aluminium alloys
Anand Mohan, Dariusz Ceglarek, Pasquale Franciosa & Michael Auinger
Pages: 362-371
DOI: 10.1080/13621718.2022.2163341

Scaling analysis for rapid estimation of lack of fusion porosity in laser powder bed fusion
Pramod R. Zagade, B. P. Gautham, Amitava De & Tarasankar DebRoy
Pages: 372-380
DOI: 10.1080/13621718.2022.2164830

Statistical analysis of residual stresses in austenitic pipe girth welds
M. Weltevreden, H. Coules, I. Hadley & Y.J. Janin
Pages: 381-387
DOI: 10.1080/13621718.2023.2164962

A study on residual stress generation versus recrystallisation in FSW joint of dissimilar alloy pair of the AA5083 and HSLA steel
Mrinal Sahu, Atanu Paul, Sudip K. Sinha & Subhas Ganguly
Pages: 388-398
DOI: 10.1080/13621718.2023.2165605

Ni–W–P layer-induced strength improvement of solder joint in Bi2Te3 thermoelectric module
Sung Hwa Bae, Yen Ngoc Nguyen & Injoon Son
Pages: 399-406
DOI: 10.1080/13621718.2023.2167039