Science and Technology of Welding and Joining, Vol. 28, No. 2, out now

Including papers covering Continuous repair of groove damage, dissimilar resistance spot welding of immiscible iron and copper alloys, and an obituary of Professor Tom Eagar.

This issue contains the following articles, which are available to members via My IOM3.

Continuous repair of groove damages using solid-state friction rolling additive manufacturing method
Haibin Liu, Yangyang Sun, Ruishan Xie, Yanchao Shi, Qingyu Shi & Shujun Chen
Pages: 89-97
DOI: 10.1080/13621718.2022.2117533
Spinodal liquid phase separation enabling dissimilar resistance spot welding of immiscible iron and copper alloy system
Sahand Taghavi & Majid Pouranvari
Pages: 98-107
DOI: 10.1080/13621718.2022.2122245
Liquation cracking susceptibility of remelted and reheated weld metals in CM247LC superalloy using multi-bead Varestraint testing
Eun-Joon Chun, Ye-Seon Jeong, Seong-Moon Seo & Heeshin Kang
Pages: 108-117
DOI: 10.1080/13621718.2022.2122246
A fully coupled thermal–microstructural–mechanical finite element process model for directed energy deposition additive manufacturing of Ti–6Al–4V
Merve Tunay, Cengiz Baykasoğlu, Oncu Akyildiz & Albert C. To
Pages: 118-127
DOI: 10.1080/13621718.2022.2127211
Variety of microstructure and mechanical properties along the laser impact welded interface
Qihan Wang, Kangnian Wang, Huimin Wang & Wenyue Zheng
Pages: 128-136
DOI: 10.1080/13621718.2022.2131085
Residual stress distribution in a large specimen fabricated by wire-arc additive manufacturing
Quan Yuan, Chuan Liu, Wenrong Wang & Mingjie Wang
Pages: 137-144
DOI: 10.1080/13621718.2022.2134963
Rapid calculation of part scale residual stresses in powder bed
additive manufacturing
Kajal Khan, L. Srinivasa Mohan, Amitava De & Tarasankar DebRoy
Pages: 145-153
DOI: 10.1080/13621718.2022.2139446

The material flow and texture-weakening mechanism in double-sided friction stir welded Mg alloy
Meng-ran Zhou, Yu-feng Sun, Yoshiaki Morisada, Qing-yu Shi & Hidetoshi Fujii
Pages: 154-161
DOI: 10.1080/13621718.2022.2139451
Pre-weld friction stir processing enabling strong and ductile fusion welds on AZ91 magnesium alloy
Hasan Jiryaei Sharahi, Majid Pouranvari & Mojtaba Movahedi
Pages: 162-171
DOI: 10.1080/13621718.2022.2140253
The most unforgettable character Prof. Tom Eagar
Pages: 172-172
DOI: 10.1080/13621718.2022.2139939