Science and Technology of Welding and Joining, Vol. 27, No. 6, ready to read

This issue has papers focused on binary classification of welding defect based on deep learning, dissimilar friction welding, and ultrasonic soldering silica glass.

This issue contains the following articles, which are available to members via My IOM3.

Binary classification of welding defect based on deep learning

Xiaopeng Wang, Xu Wang, Baoxin Zhang, Jinhan Cui, Xinpeng Lu, Chuan

Ren, Weijia Cai & Xinghua Yu

Pages: 407-417

DOI: 10.1080/13621718.2022.2061691

Dissimilar friction welding of NiTi shape memory alloy and steel reinforcing bars for seismic performance

Matthieu B. Lezaack, Aude Simar, Yannick Marchal, Martin Steinmetz, Koen Faes & João Pacheco de Almeida

Pages: 418-428

DOI: 10.1080/13621718.2022.2061692

Improvement of resistance spot weldability of Al–Fe-alloy-coated HPF steel sheets

Sang-Man Yun, Hojun Gwon, Jin-Keun Oh & Sung-Joon Kim

Pages: 429-436

DOI: 10.1080/13621718.2022.2061693

Improvement of inhomogeneity of microstructure and mechanical properties for 316 stainless steel laser-MIG hybrid welded joint assisted by alternating magnetic field

Fuyun Liu, Caiwang Tan, Guolong Ma, Xiaohui Han, Bo Chen, Xiaoguo Song, Hongyun Zhao & Guodong Wang

Pages: 437-445

DOI: 10.1080/13621718.2022.2063565

Heat propagation simulation of thin-walled Ti6Al4V alloy components fabricated by double-wire GTAW additive manufacturing

Hua Tian, Yi Xin, Lianzhong Lu, Xinya Chen, Guoyang Zhang, Yangchuan Cai, Yinbao Tian & Jian Han

Pages: 446-454

DOI: 10.1080/13621718.2022.2063566

Ultrasonic soldering silica glass and 2024 alloy in low temperature

Ruixiang Yi, Chao Chen, Haijun Li & Yibo Ma

Pages: 455-462

DOI: 10.1080/13621718.2022.2063567

Butt welding of TiZrMoCuBe MGC/TC4 titanium alloy using a pulsed Nd:YAG laser

Ke Li, Minghua Chen, Liang Liu & Fufa Wu

Pages: 463-471

DOI: 10.1080/13621718.2022.2064648

Unravelling microstructure evolution induced mechanical responses in weld metals of EH420 shipbuilding steel subjected to varied high heat inputs

Xu Xie, Ming Zhong, Tan Zhao & Cong Wang

Pages: 472-478

DOI: 10.1080/13621718.2022.2064649

Understanding the grain refinement mechanisms in aluminium 2319 alloy produced by wire arc additive manufacturing

N. Mclean, M. J. Bermingham, P. Colegrove, A. Sales & M. S. Dargusch

Pages: 479-489

DOI: 10.1080/13621718.2022.2064704