Plastics, Rubber and Composites special issue, Manufacturing of Advanced Composites, ready to read

This new issue includes Transverse liquid composite moulding processes for advanced composites material manufacturing, Contact resistance heating of unidirectional carbon fibre tows in a powder-epoxy towpregging line, and Investigations on the mechanical properties of PLA/Flax fibre composites obtained by fused filament fabrication.

This issue contains the following articles, which are available to members via My IOM3.

Transverse liquid composite moulding processes for advanced composites material manufacturing

Jeeeun Lee, Miro Duhovic, Tom Allen & Piaras Kelly

Pages: 373-382

DOI: 10.1080/14658011.2022.2108983

Contact resistance heating of unidirectional carbon fibre tows in a powder-epoxy towpregging line

Murat Çelik, Thomas Noble, Abdul Haseeb, James Maguire, Colin Robert & Conchúr M. Ó Brádaigh

Pages: 383-392

DOI: 10.1080/14658011.2022.2108982

Investigations on the mechanical properties of PLA/Flax fibre composites obtained by Fused Filament Fabrication

H. Ramezani Dana & M. El Mansori

Pages: 393-406

DOI: 10.1080/14658011.2022.2110554

Development of a new method for manufacturing hollow fibre-reinforced plastic structures for aeronautical applications using structural CFRP cores

Thomas Rief, Nicole Motsch-Eichmann, David May & Joachim Hausmann

Pages: 407-417

DOI: 10.1080/14658011.2022.2117120

The influence of guide ring size on braid architecture

B. Grimes, P. Giddings & N. A. Warrior

Pages: 418-422

DOI: 10.1080/14658011.2022.2117122

Densification of fibre-reinforced composite polymers under rotational moulding conditions

D. Castellanos, P. Martin, M. McCourt, M. Kearns, J. Butterfield & P. Cassidy

Pages: 423-435

DOI: 10.1080/14658011.2022.2108985

Experimental and numerical characterisation of fibre orientation distributions in compression moulded carbon fibre SMC

C. Qian, D. Norman, M. A. Williams & K. Kendall

Pages: 436-444

DOI: 10.1080/14658011.2022.2108984

Polymer/carbon pin through thickness reinforcement

William Moses, Thomas Dooher, Alistair McIlhagger & Edward Archer

Pages: 445-453

DOI: 10.1080/14658011.2022.2108981

Evaluation of different bonding strategies for glass fibre-reinforced epoxy resin with embedded elastomer layers

Jan Eric Semar, David May & Peter Mitschang

Pages: 454-461

DOI: 10.1080/14658011.2022.2111512