Materials Science and Technology, Vol. 38, No. 18, ready to read

Content includes A comparative study on the physical properties of a fluoro rubber complex, Characterisation of AlCrCuFeMox high entropy alloys for nuclear fuel cladding and the Effect of fibre arrangement on temperature field of CFRP induction heating.

This issue contains the following articles, which are available to members via My IOM3.

Microstructure, thermodynamics and compressive properties of Al0.5CoCrCuFeNi-X (X=V,Si,VSi) high-entropy alloys

Zhao-Qin Wang, Yu Shi & Xiao-Rong Wang

Pages: 1555-1562

DOI: 10.1080/02670836.2022.2092999

Characterisation of AlCrCuFeMox high entropy alloys for nuclear fuel cladding

Xincheng Zhu, Zhenrui Tao, Chunji Wang, Yanwei Zhang, Guanghai Bai & Rui Lan

Pages: 1563-1572

DOI: 10.1080/02670836.2022.2093000

Mechanical properties and failure analysis of refill friction stir spot-welded 5052/2A12 joints

Tao Yuan, Shaoqian Kang, Xiaoqing Jiang, Fajie Tang, Yanjun Gao & Xing Zheng

Pages: 1573-1584

DOI: 10.1080/02670836.2022.2093001

SmCl3’s effect on plasma electrolytic oxidation coating’s corrosion characteristics on AZ91D

XinYue Lan, Dan Xiong, Ping Wang, Ting Wu, YanFei Duan, Zhao Yang & Dong Xiang

Pages: 1585-1596

DOI: 10.1080/02670836.2022.2094574

A comparative study on the physical properties of a fluoro rubber complex

Jeongbae Park, Beomcheol Lee & Hong Jip Kim

Pages: 1597-1604

DOI: 10.1080/02670836.2022.2096275

Dynamic compression behaviour and constitutive description of fine-grain Mg–4Zn–1Y alloy

Xuanyu Liu, Pingli Mao, Xiaoxu Wu, Zheng Liu, Le Zhou, Zhi Wang & Feng Wang

Pages: 1605-1616

DOI: 10.1080/02670836.2022.2096820

Laser welding of FeCoCrNiMnAlx (x = 0, 0.75) high-entropy alloys fabricated by additive manufacturing

Mengdie Shan, Songyu Wang, Yangchuan Cai, Feifeng Gao, Sunusi Marwana Manladan, Lisong Zhu, Da Sun & Jian Han

Pages: 1617-1624

DOI: 10.1080/02670836.2022.2096821

Compressive behaviour and energy absorption of functionally graded composite foams

Xiaolong Wang, Xudong Yang & Ying Cheng

Pages: 1625-1635

DOI: 10.1080/02670836.2022.2097414

Effect of fibre arrangement on temperature field of CFRP induction heating

Tianyu Fu, Hui Zhao, Ning Yang, Jun Zhu & Shaodong Zhou

Pages: 1636-1644

DOI: 10.1080/02670836.2022.2097766

Critical undercooling of growth mode transition in undercooled Al-80%Si-1.0%P alloy

Bo Dang, Zengyun Jian & Junfeng Xu

Pages: 1645-1650

DOI: 10.1080/02670836.2022.2097767

Effects of Ga on microstructure and mechanical properties of HSRRed Mg–Zn–Zr alloys

Yang Nie, Hongge Yan, Jihua Chen, Qing Chen, Weijun Xia, Bin Su & Jiale He

Pages: 1651-1658

DOI: 10.1080/02670836.2022.2098621

Effects of vacuum oil quenching on distortion of 42CrMo Navy C-ring

Jing Liu, Jiadong Li, Yong Tian, Yong Li & Zhaodong Wang

Pages: 1659-1666

DOI: 10.1080/02670836.2022.2098622

Study on microstructure evolution and deformation softening mechanism of a Ti–47.5Al–2.5V–1.0Cr–0.2Zr alloy

Xuejian Lin, Hongjun Huang, Xiaoguang Yuan, Yinxiao Wang, Bowen Zheng, Xiaojiao Zuo & Ge Zhou

Pages: 1667-1681

DOI: 10.1080/02670836.2022.2100596

Retraction

Pages: 1682-1682

DOI: 10.1080/02670836.2022.2099860