Ironmaking & Steelmaking, Vol. 49, No. 9, ready to read

Including papers on Causality analysis and prediction of blast furnace state based on convergence cross mapping, Effect of pulverized coal residues on the blast furnace streaming conditions and Comments on oxide inclusion formation/removal in the ESR process.

This issue contains the following articles, which are available to members via My IOM3.

Influence of heat flux different between wide and narrow face in continuous casting mould on unevenness of hypo-peritectic steel solidification at off-corner

Kohei Furumai, Norichika Aramaki & Katsunari Oikawa

Pages: 845-859

DOI: 10.1080/03019233.2022.2063654

Operational application of numerical modelling for evaluation of hearth condition over a blast furnace campaign: Whyalla No. 2 Blast Furnace 4th campaign

X.F. Dong, P. Zulli, J. Tsalapatis & M. Middleton

Pages: 860-874

DOI: 10.1080/03019233.2022.2065105

Causality analysis and prediction of blast furnace state based on convergence cross mapping

Hongyang Li, Xiaojie Liu, Xin Li, Xiangping Bu, Hongwei Li & Qing Lyu

Pages: 875-886

DOI: 10.1080/03019233.2022.2065447

Numerical simulation on the centre macrosegregation during Billet continuous casting with the soft reduction

Haitao Ma, Jiongming Zhang, Yanbin Yin, Zhaozhao Yan & Huayang Liu

Pages: 887-897

DOI: 10.1080/03019233.2022.2069989

Effect of pulverized coal residues on the blast furnace streaming conditions

Fabian Perret, Alexander Babich & Dieter Senk

Pages: 898-904

DOI: 10.1080/03019233.2022.2071092

Industrial internet platforms: applications in BF ironmaking

Hongyang Li, Xin Li, Xiaojie Liu, Xiangping Bu, Hongwei Li & Qing Lyu

Pages: 905-916

DOI: 10.1080/03019233.2022.2069990

Comments on oxide inclusion formation/removal in the ESR process

Alec Mitchell & Ewa Sjoqvist-Persson

Pages: 917-931

DOI: 10.1080/03019233.2022.2069998

Effect of CO–CO2 and H2–H2O on the reduction degree of fluxed pellets: reduction mechanism within hydrogen-rich blast furnace

Chenyang Xu, Anjun Xu, Jianliang Zhang, Zhengjian Liu, Yaozu Wang, Rongrong Wang, Anyang Zheng & Liming Ma

Pages: 932-939

DOI: 10.1080/03019233.2022.2071093

The effect of TiN precipitated particles on the austenite grain and hardenability of 20CrMnTi gear steel

Yao Li, Guo-guang Cheng, Jin-long Lu & Jun Sun

Pages: 940-953

DOI: 10.1080/03019233.2022.2075688