Ironmaking & Steelmaking, Vol. 49, No. 1, ready to read
This new issue features an estimation model for cross temperature measuring, a vision-based detection system of slag flow, and a measurement model of molten steel flow velocity and more.
This issue contains the following articles, which are available to members via My IOM3.
An estimation model for cross temperature measuring in blast furnace ironmaking
Pu Huang, Jingyu Zhao & Yutao Wang
Pages: 1-9
DOI: 10.1080/03019233.2021.1959871
Vision-based detection system of slag flow from ladle to tundish with the help of the detection of undulation of slag layer of the tundish using an image analysis technique
Arunjeet Chakraborty, Joyjeet Ghose, Sarbani Chakraborty & Biswajit
Chakraborty
Pages: 10-15
DOI: 10.1080/03019233.2021.1959872
Influence of pelletizing process parameters on the performance of V–Ti magnetite green pellets for composite agglomeration
Zhan-Guo Li, Zheng-Jian Liu, Jian-Liang Zhang, Yao-Zu Wang, Li-Ming
Ma, Le-Le Niu, Chen-Yang Xu & Gui-Lin Wang
Pages: 16-23
DOI: 10.1080/03019233.2021.1959873
Measurement model of molten steel flow velocity in the continuous casting mould based on the Seebeck principle
Chen Tian, Lei Yuan, Xinglong Yao, Zhenli Liu, Yang Song, Guoqi Liu,
Jingkun Yu & Hongxia Li
Pages: 24-28
DOI: 10.1080/03019233.2021.1962495
Real-time measurement of stave thickness in a blast furnace using sacrificial ultrasonic waveguide
Rohit Kumar Agrawal, Rajendran Shunmugasundaram, Shivanandan Indimath,
Taher Mohammed Sahara, Bonikila Pradeep Reddy, Vikrant Pratap & Srinivasagan Balamurugan
Pages: 29-41
DOI: 10.1080/03019233.2021.1966232
Value in use of lime in BOF steelmaking process
Yan Zhiming, Li Zushu, Manocha Sanjeev, Ponchon Francois & Nafornita Sorinel
Pages: 42-48
DOI: 10.1080/03019233.2021.1966233
Effect of Al2O3 on shear-thinning property of mould flux for high-speed thin slab continuous casting and its study on the mechanism
Zhipeng Yuan, Liguang Zhu & Ying Xu
Pages: 49-59
DOI: 10.1080/03019233.2021.1966264
Slag parameters and sulphur partition in blast furnace hearth: Ukrainian case and international comparison
Volodymyr Shatokha
Pages: 60-69
DOI: 10.1080/03019233.2021.1966265
Prediction of nitrogen behaviour in the AOD process by a time-dependent thermodynamic model
Wenjing Wei, Joel Gustavsson, Peter B. Samuelsson, Rutger Gyllenram,
Anders Tilliander & Pär G. Jönsson
Pages: 70-82
DOI: 10.1080/03019233.2021.1966266
Numerical simulation of fuel layered distribution iron ore sintering technology
Siddhartha Shrestha, Jin Xu, Aibing Yu & Zongyan Zhou
Pages: 83-100
DOI: 10.1080/03019233.2021.1968259
Microsegregation and solidification characteristics of an advanced high strength steel – Part I: modelling and prediction on hot cracking susceptibility
Lu Han, Hongxiang Li, Begoña Santillana & Linzhong Zhuang
Pages: 101-108
DOI: 10.1080/03019233.2021.1968260
Supersonic jet characteristics of two parameter oxygen lance nozzle
Chao Feng, Tao Xia, Guangsheng Wei, Jianfeng Dong, Rong Zhu & Kai Dong
Pages: 109-121
DOI: 10.1080/03019233.2021.1968261
