Science and Technology of Welding and Joining, Vol. 26, No. 7, online
Including an experimental study of Cu/Fe underwater self-constrained explosive welding tubes and the characteristics of ultrasonic spot welding of Cu/Ni dissimilar metals.
This new issue contains the following articles, which are available to members via My IOM3.
Improvement of microstructure and mechanical properties of AZ61 Mg alloys subjected to rapid cooling friction stir welding
Nan Xu, Ruonan Feng, Zike Ren, Bokun Gu, Qining Song & Yefeng Bao
Pages: 503-512
DOI: 10.1080/13621718.2021.1957630
Direct drive friction welding of a multi-phase Al13Cr23.5Fe20Co20Ni23.5 high-entropy alloy
Lei Zuo, Kai Zhang & Tao Zhang
Pages: 513-520
DOI: 10.1080/13621718.2021.1957631
Experimental study of Cu/Fe underwater self-constrained explosive welding tube
Qichao Tian, Yang Ming, Junfeng Xu, Honghao Ma, Yang Zhao, Zhaowu Shen, Zhiqiang Ren & Heng Zhou
Pages: 521-528
DOI: 10.1080/13621718.2021.1950497
Characteristics of ultrasonic spot welding of Cu/Ni dissimilar metals
Z. L. Ni, Y. Liu, H. Li, Y. H. Wang, D. T. Cui, J. Peng, R. Z. Zhang & F. X. Ye
Pages: 529-539
DOI: 10.1080/13621718.2021.1967013
Effect of laser power on the grain morphology and microhardness of dual laser-beam bilateral synchronous welded 2219 aluminium alloy T-joint
Yue Li, Yanqiu Zhao, Jiayao Wang & Xiaohong Zhan
Pages: 540-550
DOI: 10.1080/13621718.2021.1967014
Effects of ultrasonic on friction stir Al–Ti welds: a comparative study
Mingrun Yu, Hongyun Zhao, Fei Xu, Tiejue Chen, Li Zhou, Xiaoguo Song & Ninshu Ma
Pages: 551-558
DOI: 10.1080/13621718.2021.1968233
