9 February 2026

Powder Metallurgy Vol. 69, No. 1, published

From microstructural control to modelling driven precision, the new issue showcases the latest advances in alloy design, powder refinement, sintering behaviour and next generation composite performance.

Metal gear parts sitting on a pile of metallic powder
© Shutterstock

IOM3 members have free online access (login required) to this and other journals published on behalf of IOM3 by Sage.

Effect of microstructure on the properties of high boron and carbon steel powders
Huynh Kinh Luan Ngo, Kaoru Yamamoto, Tetsuya Okuyama, Masaki Kudo
pp. 3–13
DOI: 10.1177/00325899251370799

Open Access: Understanding the impact of high-energy ball mill tooling on powder refinement and alloy formation: Microstructural evolution in immiscible W-Cr alloys
Colton A Gilleland, B Chad Hornbuckle, Kris A Darling, Gregory B Thompson
pp. 14–27
DOI: 10.1177/00325899251372204

Powder bed non-uniformity investigations via discrete element modelling for binder jetting technology
Thomas Grippi, Andrii Maximenko, Alberto Cabo Rios, Runjian Jiang, Elisa Torresani, Eugene Olevsky
pp. 28–41
DOI: 10.1177/00325899251361213

Hot deformation behavior and processing map of CIPed Ti-6Cr-5Mo-5V-4Al mixed alloyed powder compressed at temperatures above the β-transus
Xin Li, Fang Yang, Lili Guo, Shihao Wang, Xinbo He, Cunguang Chen, Zhimeng Guo
pp. 42–56
DOI: 10.1177/00325899251367563

Influence of sintering temperature and atmosphere on densification behaviour and microstructure of the H13 tool steel
Jordan Lacorne, Aurélien Etiemble, Xavier Boulnat, Romain Faye, Sandra Simon, Galy Ingrid Nkou-Bouala, Victor Trillaud, Philippe Steyer, Erik Bonjour, Jérôme Adrien, Eric Maire
pp. 57–69
DOI: 10.1177/00325899251380923

Advanced finite element modeling of nickel-based alloy powder packing flow during sintering process
Junjie Zheng, Chengkang Qi, Xinyan Zhang, Yihang Yang, Fei Li, Jia Lin
pp. 70–75
DOI: 10.1177/00325899251358300

Microstructure and properties of titanium matrix composites reinforced by AlCoCrFeNi high-entropy alloy
Qiping Zhou, Junming Luo, Shiyu Cui, ZhiJing Zhao, Lu Liu
pp. 76–85
DOI: 10.1177/00325899251367564

Preparation of powder from Ti-6Al-4V chips by self-propagating high-temperature synthesis hydrogenation and thermal dehydrogenation
Nikita Petrovich Cherezov, Mikhail Ivanovich Alymov
pp. 86–95
DOI: 10.1177/00325899251372409

Effect of tungsten carbide/ cobalt powder metallurgy tool electrode produced by nano/micron particles on wear and corrosion resistance of surfaces produced by electric discharge machining
Pujari Srinivasa Rao, Dora Siva Prasad, Nadimpalli Sarada Purnima, Kaladari Adarsha Kumar
pp. 96–112
DOI: 10.1177/00325899251375303