Surface Engineering, Vol. 34, No. 3

Surface Engineering Division
23 Jan 2018

Surface Engineering, Vol. 34, No. 3, 04 Mar 2018 is now available online. IOM3 members have free access to the papers below via our journals page.


Substrate pre-treatment by dry-ice blasting and cold spraying of titanium

S. Dong & H. Liao

Pages: 173-180

DOI: 10.1080/02670844.2016.1210894


Effect of flame remelting on microstructure and wear behaviour of plasma sprayed NiCrBSi-30%Mo coating

X.-C. Yang, G.-L. Li, H.-D. Wang, T.-S. Dong & J.-J. Kang

Pages: 181-188

DOI: 10.1080/02670844.2016.1226053


Mechanism of improved hydrogen embrittlement resistance of low-temperature plasma carburised stainless steel

Y. Li, W. Li, X. Zhu, H. Zhou & X. Jin

Pages: 189-192

DOI: 10.1080/02670844.2016.1227520


Cold spray deposition to prevent fouling of polymer surfaces

C. Stenson, K. A. McDonnell, S. Yin, B. Aldwell, M. Meyer, D. P. Dowling & R. Lupoi

Pages: 193-204

DOI: 10.1080/02670844.2016.1229833


Nitrocarburising of AISI 316 stainless steel at low temperature

L. Jiang, H. Luo & C. Zhao

Pages: 205-210

DOI: 10.1080/02670844.2016.1253268


Cavitation erosion behaviour and mechanism of HVOF-sprayed NiCrBSi–(Cr3C2–NiCr) composite coatings

X. Yang, J. Zhang & G. Li

Pages: 211-219

DOI: 10.1080/02670844.2016.1258770


Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method

M. Jafari, J. Mostaghimi, H. Monajatizadeh & M. Rafiei

Pages: 220-225

DOI: 10.1080/02670844.2016.1259731


Microstructural characterisation of borided binary Fe–W alloys

Y. Azakli & M. Tarakci

Pages: 226-234

DOI: 10.1080/02670844.2016.1263712


Aluminium to steel resistance spot welding with cold sprayed interlayer

Marcin Winnicki, Aleksandra Małachowska, Marcin Korzeniowski, Marek Jasiorski & Agnieszka Baszczuk

Pages: 235-242

DOI: 10.1080/02670844.2016.1271579


Ti and nitride surface modification of copper by pack cementation

D. Stathokostopoulos, D. Chaliampalias, N. Pliatsikas, S. Kassavetis, E. Pavlidou, P. Patsalas, S. Logothetidis, K. Chrissafis & G. Vourlias

Pages: 243-250

DOI: 10.1080/02670844.2016.1274841


Metallisation of polycarbonates using a low pressure cold spray method

Aleksandra Małachowska, Marcin Winnicki, Mateusz Stachowicz & Marcin Korzeniowski

Pages: 251-258

DOI: 10.1080/02670844.2016.1277843