Surface Engineering, Vol. 38, No. 3, now available
Papers include laser polishing of additively manufactured metal parts: a review, creating a self-lubricating coating on TC4 alloy by laser cladding and ab investigation of hybrid polyurethane silica nanocomposites for DTM coating applications.
This issue contains the following articles, which are available to members via My IOM3.
Laser polishing of additively manufactured metal parts: a review
Emanuele Manco, Ersilia Cozzolino & Antonello Astarita
Pages: 217-233
DOI: 10.1080/02670844.2022.2072080
Experimentally investigating hybrid polyurethane silica nanocomposites for DTM coating applications
Sukanya Gangopadhyay & P. A. Mahanwar
Pages: 234-243
DOI: 10.1080/02670844.2022.2073862
Preparation of a novel multi-layered AlSnCu coating for journal bearings
Hui Song, Jie Chen, Zhiyong Liu & Nan Jiang
Pages: 244-251
DOI: 10.1080/02670844.2022.2076993
Electric discharge coating on graphite using W–Cu sintered tool
Rashed Mustafa Mazarbhuiya & Maneswar Rahang
Pages: 252-260
DOI: 10.1080/02670844.2022.2078076
Surface modification of Al-7075 using Cu-CNT green tool in EDM
Bhargab Madhab Barua & Maneswar Rahang
Pages: 261-270
DOI: 10.1080/02670844.2022.2082749
Composite coating by TIG cladding with different rare earth oxides
Monty Kumar, Shakti Kumarhttps://orcid.org/0000-0002-2459-569X, Kailash Jha & Amitava Mandal
Pages: 271-287
DOI: 10.1080/02670844.2022.2080901
Surface and bulk modification techniques to mitigate silt erosion in hydro turbines: a review of techniques and parameters
Jai Singh & S. K. Nath
Pages: 288-302
DOI: 10.1080/02670844.2022.2082750
Synthesis and self-cleaning properties of superamphiphobic coatings based on burr-like copolymer particles
Xia Zhao & Yanping Duan
Pages: 303-312
DOI: 10.1080/02670844.2022.2082763
Ni–WS2–Ti–6Al–4V self-lubricating coating on TC4 alloy by laser cladding
Shakti Kumar, Monty Kumar, Amitava Mandal & Alok Das
Pages: 313-323
DOI: 10.1080/02670844.2022.2086961