Ironmaking & Steelmaking - Steel World issue - ready to read
Content includes papers on rapid alloy prototyping for strip steel development, electrode manufacture for the remelting processes and a novel method for real-time burden profile measurement at blast furnaces.
This new issue contains the following articles, which are available to members via My IOM3.
Steel World – Editorial Review
Norman McPherson
Pages: 483-484
DOI: 10.1080/03019233.2021.1936909
Kinetics of hydrogen reduction of magnetite concentrate particles at 1623–1873 K relevant to flash ironmaking
Mohamed Elzohiery, Deqiu Fan, Yousef Mohassab & H. Y. Sohn
Pages: 485-492
DOI: 10.1080/03019233.2020.1819942
Rapid alloy prototyping for strip steel development: DP800 steel case study
Y. Zhu, C. Slater, S. Connolly, D. Farrugia & C. Davis
Pages: 493-504
DOI: 10.1080/03019233.2021.1880036
Electrode manufacture for the remelting processes
Alec Mitchell
Pages: 505-513
DOI: 10.1080/03019233.2020.1855690
Comparison of a laboratory-scale coke and a pilot-scale coke from matched coal
Hannah Lomas, Richard Roest, Adam Wells, Tizshauna Thorley, Hui Wu, Zhengyi Jiang, Richard Sakurovs, Robert Fetscher, Xing Xing & Merrick R. Mahoney
Pages: 514-526
DOI: 10.1080/03019233.2020.1814488
The poisoning effect of sintering dust on V2O5–WO3/TiO2 catalyst for NOx removal in iron ore sintering flue gas
Li-xin Qian, Long Ding, Hong-ming Long, Yu-lin Hu, Zheng-wei Yu & Chunbao Charles Xu
Pages: 527-533
DOI: 10.1080/03019233.2020.1815268
Effect of powder injection rate on the flow field of coherent lime powder injection (C-LPI) for EAF steelmaking
Guangsheng Wei, Rong Zhu, Chao Feng, Lingzhi Yang & Kai Dong
Pages: 534-546
DOI: 10.1080/03019233.2020.1816805
Surface defect detection of steel strips based on classification priority YOLOv3-dense network
Jiaqiao Zhang, Xin Kang, Hongjun Ni & Fuji Ren
Pages: 547-558
DOI: 10.1080/03019233.2020.1816806
Numerical analysis on flatness adjusting performance of hot wide strip temper mill with small-diameter work rolls
Hui Li, An-rui He, Jian Shao, Chi-huan Yao, Jian Zheng, En-rui Wang & Zhi-hong Zhang
Pages: 559-569
DOI: 10.1080/03019233.2020.1821591
Effect of various components on the distribution of phosphorus in CaO–FeO–MgO–SiO2–MnO–TiO2–V2O5–P2O5 slag based on IMCT
Yun Zhou, Rong Zhu, Hongyang Wang & Hongjin Zhang
Pages: 570-578
DOI: 10.1080/03019233.2020.1821592
Novel method for real-time burden profile measurement at blast furnace
Chitresh Kundu, Prabal Patra, Bipan Tudu & Rajib Bandyopadhyay
Pages: 579-585
DOI: 10.1080/03019233.2020.1821593
Analysis of tuyere failure categories in 5800 m blast furnace
T. L. Gao, K. X. Jiao, H. B. Ma & J. L. Zhang
Pages: 586-591
DOI: 10.1080/03019233.2020.1823199
Ultrasonic guided wave technique for the detection of extremely shallow corrosion defects in tie rods of coke oven batteries
Shivanandan Indimath, Rohit Agrawal, Rajendran Shunmugasundaram, Taher Mohammed Sahara, Srinivasagan Balamurugan, Sujit Dutta, Uday Shankar, Awadhesh Kumar Thakur, Avijit Mukherjee & Ranjan Singh
Pages: 592-606
DOI: 10.1080/03019233.2020.1823200
Study of dynamic refractory wear by slags containing very high FeO contents under steelmaking conditions
Jonas L. Svantesson, Björn Glaser, Mikael Ersson, Jesse F. White, Matej Imris & Pär G. Jönsson
Pages: 607-618
DOI: 10.1080/03019233.2020.1827672
Wireless Dip Temperature Lance for provisioning hot metal analytics of blast furnaces
Dibyayan Patra, Chitresh Kundu & Prabal Patra
Pages: 619-627
DOI: 10.1080/03019233.2020.1833677
Simulation and application of tapping online refining in EAF steelmaking process
Xuetao Wu, Rong Zhu, Baochen Han, Yuhua Peng, Guangsheng Wei & Kai Dong
Pages: 628-636
DOI: 10.1080/03019233.2020.1836708