Powder Metallurgy, Vol. 59, No. 5

Particulate Engineering Committee
,
19 Dec 2016

Powder Metallurgy, Vol. 59, No. 5, 19 Oct 2016 is now available online. IOM3 members have free access to the papers below via our journals page.

Winfried J. Huppmann

Herbert Danninger

Pages: 301-301

DOI: 10.1080/00325899.2016.1234155

 

Evolution of the microstructure and mechanical properties of Mg-matrix in situ composites during spark plasma sintering

N. Q. Cao, K. Narita, E. Kobayashi & T. Sato

Pages: 302-307

DOI: 10.1080/00325899.2016.1219087

 

Fabrication of a graded pore-sized porous FeAl intermetallic membrane

W. Xie, H. Y. Gao, Y. H. He, B. N. Xie & C. T. Liu

Pages: 308-313

DOI: 10.1080/00325899.2016.1228557

 

FeAl powder fabrication by rapid solidification and water vapour-based process

M. Salazar, V. H. López, N. Bautista, R. Cuamatzi & F. A. Lagos

Pages: 314-320

DOI: 10.1080/00325899.2016.1228572

 

Feasibility study of ‘elephant foot’ phenomenon during liquid phase sintering of systems with volatile components

M. Mousapour, M. Azadbeh & H. Danninger

Pages: 321-328

DOI: 10.1080/00325899.2016.1242526

 

Friction and wear behaviours of surface densified powder metallurgy

Fe–2Cu–0.6C material

X. Liu, Z.-y. Xiao, H.-j. Guan, W. Zhang & F.-l. Li

Pages: 329-334

DOI: 10.1080/00325899.2016.1242880

 

Microstructure and mechanical properties of the PM precipitation-hardening alloy N07626: effect of HIP temperature and solution annealing

P. Stella, G. Masi & A. Molinari

Pages: 335-343

DOI: 10.1080/00325899.2016.1243338

 

Axial fatigue testing of Ti–6Al–4V using an alternative specimen geometry fabricated by metal injection moulding

J. Soyama, O. M. Ferri, T. Ebel & K. U. Kainer

Pages: 344-349

DOI: 10.1080/00325899.2016.1251060

 

Studies on alloying process of a ferritic/martensitic oxide dispersion strengthened (ODS) steel prepared by mechanical alloying of elemental powders

S. K. Rajulapati, U. Prakash, K. Laha & V. V. Dabhade

Pages: 350-358

DOI: 10.1080/00325899.2016.1254893

 

ODS ferritic steels produced by an alternative route (STARS):

microstructural characterisation after atomisation, HIPping and heat treatments

E. Gil, N. Ordás, C. García-Rosales & I. Iturriza

Pages: 359-369

DOI: 10.1080/00325899.2016.1254894

 

Effects of different carbon sources on the compressive properties of in situ high-volume-fraction TiCx/2009Al composites

L. Wang, F. Qiu, S.-L. Shu, Q.-L. Zhao & Q.-C. Jiang

Pages: 370-375

DOI: 10.1080/00325899.2016.1251061

 

The effect of FeS film on the surface of iron powder particles on mechanical properties and fracture of Fe–Cu–C alloys

F. Yang, L. C. Guo, P. Li & Z. M. Guo

Pages: 376-383

DOI: 10.1080/00325899.2016.1248331

 

Influence of the SiC content and sintering temperature on the microstructure, mechanical properties and friction behaviour of sintered self-lubricating composites

C. Binder, T. Bendo, R. V. Pereira, G. Hammes, J. D. B. de Mello & A. N. Klein

Pages: 384-393

DOI: 10.1080/00325899.2016.1250036

 

On the swelling of silver powder during sintering

E. Biguereau, D. Bouvard, J. M. Chaix & S. Roure

Pages: 394-400

DOI: 10.1080/00325899.2016.1250037