Materials Science and Technology, Vol. 36, No. 6

Materials Science & Technology Division
,
3 Apr 2020

Materials Science and Technology, Vol. 36, No. 6 is available online. Members can read via our Member Portal.
The issue contains the following papers.


Research status and development of magnesium matrix composites
Guohong Ma, Hao Xiao, Jia Ye & Yinshui He
Pages: 645-653
DOI: 10.1080/02670836.2020.1732610


Phases, microstructures and properties of multi-component FeCoNi-based alloys
Ning Liu, Wen Ding, Xiao Jing Wang, Jing Zhang, Peng Jie Zhou & Chen Mu
Pages: 654-660
DOI: 10.1080/02670836.2020.1726017


Surface mechanical attrition treatment-induced dissolution of Cu4Ti precipitates in Cu–4wt-%Ti alloy
Huan Wei, Xinyu Dai, Pengju Han, Caizhi Zhou, Yinghui Wei & Lifeng Hou
Pages: 661-667
DOI: 10.1080/02670836.2020.1726600


Non-isothermal β grain growth behaviour of pure titanium under laser quenching
Xiao Zong, Zhuo Li, Jing Li, Xu Cheng, Haibo Tang & Huaming Wang
Pages: 668-673
DOI: 10.1080/02670836.2020.1729498


In-situ observation of microcrack evolution in a dual-phase steel during tensile straining
Bin Chen, Tianfeng Lu, Kaiyang Yin, Bingyi Sun, Qing Dong & Xiaodong
Wang
Pages: 674-680
DOI: 10.1080/02670836.2020.1729499


The microstructures and tensile properties of aged Fe-xMn-8Al-0.8C low-density steels
Dong Han, Hua Ding & Degang Liu
Pages: 681-689
DOI: 10.1080/02670836.2020.1732075


Effect of microsegregation on carbide-free bainitic transformation in a high-silicon cast steel
Nicolás E. Tenaglia, Juan M. Massone, Roberto E. Boeri & John G. Speer
Pages: 690-698
DOI: 10.1080/02670836.2020.1732076


Characterisation of heterogeneous microstructure in large forged products using nonlinear ultrasonic method
Saju T. Abraham, S. Shivaprasad, C.R. Das, S. K. Albert, B. Venkatraman & Krishnan Balasubramaniam
Pages: 699-708
DOI: 10.1080/02670836.2020.1732077


Influence of Si content on thermal expansion characteristic of Al–Si alloys
Yu-Mi Kim, Se-Weon Choi & Sung-Kil Hong
Pages: 709-716
DOI: 10.1080/02670836.2020.1732095


Lowering of elastic modulus in the near-beta Ti–13Nb–13Zr alloy through heat treatment
Pramod Kumar, G. S. Mahobia, V. Singh & Kausik Chattopadhyay
Pages: 717-725
DOI: 10.1080/02670836.2020.1732608


Photo-luminescence characteristics of binary P2O5–CaO glass ceramic
Ning Xie, Chengguo Ming, Yanming Hao & Manting Pei
Pages: 726-730
DOI: 10.1080/02670836.2020.1735705


An analysis of microstructure and impression creep response of squeeze-cast AZ91–xBi–ySr alloys
Jichil Majhi, Tanmoy Das, A. Basu & A. K. Mondal
Pages: 731-742
DOI: 10.1080/02670836.2020.1736763


Phenomenological representation of mechanical spectroscopy of high damping MnCuNiFe alloy
Z. C. Jiang, S. B. Zhang, Q. C. Tian, P. G. Ji & F. X. Yin
Pages: 743-749
DOI: 10.1080/02670836.2020.1738057


Plastic behaviours during tempering by crystal plasticity analyses using fast Fourier transform
Yosuke Yamazaki, Takayuki Otsuka, Kazuo Okamura & Yoji Shibutani
Pages: 750-758
DOI: 10.1080/02670836.2020.1738058


Reaction kinetics of Cu–Ni and B4C in Cu–Ni alloy under solid-state sintering
Lei Jia, Jin Xu, Shu-feng Li, Zhen-lin Lu, Hui Xie & Katsuyoshi Kondoh
Pages: 759-764
DOI: 10.1080/02670836.2020.1738070


Grain growth in IN718 superalloy fabricated by laser additive manufacturing
Yu Cao, Pucun Bai, Fei Liu & Xiaohu Hou
Pages: 765-769
DOI: 10.1080/02670836.2020.174086