Materials Science and Technology, Vol. 33, No. 10,

Materials Science & Technology Division
23 May 2017

Materials Science and Technology, Vol. 33, No. 10, 03 Jul 2017 is now available online. IOM3 members have free access to the papers below via our journals page.


Critical assessment: friction stir processing, potential, and problems

Adrian P. Gerlich

Pages: 1139-1144

DOI: 10.1080/02670836.2017.1300420


Application and exploration of friction stir welding/processing in plastics industry

Jicheng Gao, Xixi Cui, Cheng Liu & Yifu Shen

Pages: 1145-1158

DOI: 10.1080/02670836.2016.1276251


Microstructural evolution and mechanical behaviour of Fe-30Mn-C steels with various carbon contents

M. Ghasri-Khouzani & J. R. McDermid

Pages: 1159-1170

DOI: 10.1080/02670836.2016.1268662


Strength and toughness of clean nanostructured bainite

M. J. Peet, L. C. D. Fielding, A. A. Hamedany, M. Rawson, P. Hill & H. K. D. H. Bhadeshia

Pages: 1171-1179

DOI: 10.1080/02670836.2016.1271522


The preparation of Al/Fe composite powders by electroless plating

Huichao Liu, Jingde Zhang, Jinyan Gou & Changku Ding

Pages: 1180-1185

DOI: 10.1080/02670836.2016.1271933


Mechanical and corrosion behaviour of in situ intermetallic phases reinforced Mg-based glass composite

Xuliang Zhang, Jingli Sun, Jian Luo, BaoBing Wang & Jialin Cheng

Pages: 1186-1191

DOI: 10.1080/02670836.2016.1271934


Microstructure and mechanical behavior of Al9Si0.8Fe alloy with different Mn contents

Renato Baldan, Jefferson Malavazi & Antônio Augusto Couto

Pages: 1192-1199

DOI: 10.1080/02670836.2016.1271966


Microstructure and mechanical properties of Cr12MoV by ultrasonic vibration-assisted laser surface melting

Jianzhong Zhou, Jiale Xu, Shu Huang, Zengrong Hu, Xiankai Meng & Yujie Fan

Pages: 1200-1207

DOI: 10.1080/02670836.2016.1273989


Microstructure and enhanced atomic diffusion of friction stir welding aluminium/steel joints

Yanni Wei, Jiangtao Xiong, Jinglong Li, Fusheng Zhang & Shuhua Liang

Pages: 1208-1214

DOI: 10.1080/02670836.2016.1274464


The effect of deformation-induced-ferrite-transformation on nanometre-sized carbides in Ti–Mo ferritic steel

Zhen Ning, Qingwu Cai, Baosheng Xie & Entao Dong

Pages: 1215-1223

DOI: 10.1080/02670836.2016.1275450


Tensile elongation of lean-alloy austenitic stainless steels: transformation-induced plasticity versus planar glide

Qiuliang Huang, Olena Volkova, Horst Biermann & Javad Mola

Pages: 1224-1230

DOI: 10.1080/02670836.2016.1277091


Application of multiple residual stress determination methods to coarse-grained biomedical implant castings

Brian Conroy, Yéli Traoré, Sanjooram Paddea, Joe Kelleher & David


Pages: 1231-1251

DOI: 10.1080/02670836.2017.1282035


Microstructural stability of long-term aged wrought Ni–Fe-based superalloys

Xinbao Zhao, Yingying Dang, Hongfei Yin, Yong Yuan, Jintao Lu, Zhen Yang, Jingbo Yan & Yuefeng Gu

Pages: 1252-1257

DOI: 10.1080/02670836.2017.1282668


Modelling of recalescence effect on austenite decomposition

Lei Guo, Hans Roelofs, Mirkka Ingrid Lembke & Harshad Kumar Dharamshi Hansraj Bhadeshia

Pages: 1258-1267

DOI: 10.1080/02670836.2017.1282693


Statement of Retraction

Pages: 1268-1268

DOI: 10.1080/02670836.2017.1314067