Materials Science and Technology, Vol. 33, No. 5

Materials Science & Technology Division
,
21 Feb 2017

Materials Science and Technology, Vol. 33, No. 5, 24 Mar 2017 is now available online. IOM3 members have free access to the papers below via our journals page.

 

Mechanical properties of WC-based hardmetals bonded with iron alloys – a review

O. J. Ojo-Kupoluyi, S. M. Tahir, B. T. H. T. Baharudin, M. A. Azmah Hanim & M. S. Anuar

Pages: 507-517

DOI: 10.1080/02670836.2016.1186929

 

The effects of neutron radiation on nickel-based alloys

M. A. Stopher

Pages: 518-536

DOI: 10.1080/02670836.2016.1187334

 

Investigation of idiomorphic ferrite and allotriomorphic ferrite using electron backscatter diffraction technique

Y. T. Chi, Y. T. Tsai, B. M. Huang & J. R. Yang

Pages: 537-545

DOI: 10.1080/02670836.2016.1216027

 

The improved plasticity of NiTi alloy via electropulsing in rolling

R. Zhu & G. Tang

Pages: 546-551

DOI: 10.1080/02670836.2016.1231745

 

Revealing heterogeneous C partitioning in a medium Mn steel by nanoindentation

B. B. He & M. X. Huang

Pages: 552-558

DOI: 10.1080/02670836.2016.1232980

 

Preparation and microstructure of AlCoCrFeNi high-entropy alloy complex curve coatings

Yu-Sen Wang, Xiao-Rong Wang, Zhao-Qin Wang, Tie-Song Lin & Peng He

Pages: 559-566

DOI: 10.1080/02670836.2016.1235533

 

Hot ductility behaviour of high manganese steels with varying aluminium contents

B. Steenken, J. L. L. Rezende & D. Senk

Pages: 567-573

DOI: 10.1080/02670836.2016.1235855

 

Numerical simulation of the macrostructure evolution of a heavy steel ingot

J. Kang, C. Zhang, T. Wang, S. Wang, H. Shen & B. Liu

Pages: 574-582

DOI: 10.1080/02670836.2016.1236225

 

Effects of tool wear on friction stir welded joints of Ti–6Al–4V alloy

A. R. Nasresfahani, A. R. Soltanipur, K. Farmanesh & A. Ghasemi

Pages: 583-591

DOI: 10.1080/02670836.2016.1237065

 

Influence factors of X80 pipeline steel girth welding with self-shielded flux-cored wire

L. H. Qi, Z. L. Jin, J. M. Zhang, Y. L. Wang, M. J. Hu & Z. C. Wang

Pages: 592-601

DOI: 10.1080/02670836.2016.1238646

 

Effect of Cu addition on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels

G. Huang, X. L. Wan, K. M. Wu, O. Isayev, O. Hress, I. Rodionova & A. A. Shirzadi

Pages: 602-614

DOI: 10.1080/02670836.2016.1238647

 

Study on carbide-bearing and carbide-free bainitic steels and their wear resistance

X. Y. Long, F. C. Zhang, J. Kang, Z. N. Yang, D. D. Wu, K. M. Wu & G. H. Zhang

Pages: 615-622

DOI: 10.1080/02670836.2016.1242205

 

Increased fatigue strength of partially stabilised zirconia achieved by shot peening

K. Takahashi, K. Iwanaka & H. Koike

Pages: 623-628

DOI: 10.1080/02670836.2016.1242271

 

Effect of holding pressure on densification and mechanical properties of Cf/Mg composites

X. Wei, L. Qi, L. Ju, W. Tian, X. Hou & H. Li

Pages: 629-634

DOI: 10.1080/02670836.2016.1242828