Materials Science and Technology, Vol. 32, No. 12, 12 Aug 2016

Materials Science & Technology Division
8 Sep 2016

Materials Science and Technology, Vol. 32, No. 12, 12 Aug 2016 is now available online. Members can read for free via our journals page.


This new issue contains the following aarticles:


Enhanced supercapacitive performance of cost-effectively synthesized ZnO-reduced graphene oxide composite

A. Majeed, A. W. Anwar, W. Ullah, T. Aziz, R. Sharif & A. Sharif

Pages: 1195-1199

DOI: 10.1080/02670836.2015.1112536


Stress-dependent deformation behaviour in bulk nanocrystalline titanium–nickel alloys

Q. Zhang, W. P. Song, X. H. Li, V. V. Stolyarov & X. Y. Zhang

Pages: 1200-1205

DOI: 10.1080/02670836.2015.1114206


Structure and properties of laser-cladded Ni-based amorphous composite coatings

Y. J. Jin, R. F. Li, Q. C. Zheng, H. Li & M. F. Wu

Pages: 1206-1211

DOI: 10.1080/02670836.2015.1114310


Fabrication and characterisation of copper–alumina nanocomposites prepared by high-energy fast milling

E. Salahi & A. Rajabi

Pages: 1212-1217

DOI: 10.1080/02670836.2015.1114696


Modelling the temperature rise effect through high-pressure torsion

H. Parvin & M. Kazeminezhad

Pages: 1218-1222

DOI: 10.1080/02670836.2015.1114713


Microstructure and performance optimisation of stainless steel formed by laser additive manufacturing

J. Li, D. Deng, X. Hou, X. Wang, G. Ma, D. Wu & G. Zhang

Pages: 1223-1230

DOI: 10.1080/02670836.2015.1114774


Nitriding of Fe–18Cr–11Mn powders using mechanical alloying method through aerating nitrogen circularly

C. Duan, Y. Shen, X. Feng, C. Chen & J. Zhang

Pages: 1231-1239

DOI: 10.1080/02670836.2015.1115244


Effect of Cu/Zn on microstructure and mechanical properties of extruded Mg–Sn alloys

Hucheng Pan, He Fu, Yuping Ren, Qiuyan Huang, Zhengyuan Gao, Jia She, Gaowu Qin, Qingshan Yang, Bo Song & Fusheng Pan

Pages: 1240-1248

DOI: 10.1080/02670836.2015.1115604


Characterisation of the structure and thermophysical properties of solid electroslag remelting slags

A. Plotkowski, J. deBarbadillo & M. J. M. Krane

Pages: 1249-1263

DOI: 10.1080/02670836.2015.1116134


Finite element analysis of laser beam-welded butt joints

T. Jiang, K. Wang, Z. M. Zhang, W. Fan & Y. Zeng

Pages: 1264-1270

DOI: 10.1080/02670836.2015.1116135


On the microstructure and erosion–corrosion resistance of AlCrFeCoNiCu high-entropy alloy via annealing treatment

J. H. Zhao, X. L. Ji, Y. P. Shan, Y. Fu & Z. Yao

Pages: 1271-1275

DOI: 10.1080/02670836.2015.1116494


Temperature evolution analysis of AZ31B magnesium alloy during quasi-static fracture

H. X. Zhang, Z. N. Wang, Y. G. Zhou, S. F. Guo, Z. F. Yan & W. X. Wang

Pages: 1276-1281

DOI: 10.1080/02670836.2015.1116761


Influence of operational parameters on the TiO2 photocatalytic degradation of Methylene blue

H. Sohrabi, A. Mozafari, M. Sajjadnejad, S. H. Tabaian & H. Omidvar

Pages: 1282-1288

DOI: 10.1080/02670836.2015.1116762


Microstructure, thermodynamics and compressive properties of AlCrCuNiZrx (x = 0,1) high-entropy alloys

Xiao-Rong Wang, Zhao-Qin Wang, Tie-Song Lin & Peng He

Pages: 1289-1295

DOI: 10.1080/02670836.2015.1117194


Evolution of bainitic microstructure in vanadium-bearing microalloyed steel with two-step cooling

A. Bhattacharya & S. Sangal

Pages: 1296-1301

DOI: 10.1080/02670836.2015.1118586