Ironmaking & Steelmaking, Vol. 45, No. 4

The Iron & Steel Society
23 Apr 2018

Ironmaking & Steelmaking, Vol. 45, No. 4, 21 Apr 2018 is now available online. IOM3 members have free access to the papers below via our journals page.


A new way of constructing the stability diagram of the system Fe–C–O with the help of a C/Fe2O3 vs. T plot and the related issue of direct and indirect reduction

R. Sarkar & D. Ghosh

Pages: 295-301

DOI: 10.1080/03019233.2016.1263053


Textural changes during recovery annealing of a heavily cold-rolled Fe–Mn–Al–Si–C alloy

B. Bhattacharya & K. Kumar

Pages: 302-308

DOI: 10.1080/03019233.2016.1263780


The effect of hydrogen addition on the carbon-deposition behavior during the reduction of pellets for the blast furnace process

W. Wang, Z. Ouyang, R. Xu, X. Li, X. Huang & Z. Xue

Pages: 309-316

DOI: 10.1080/03019233.2016.1263782


Hot workability analysis and processing parameters optimisation for 20CrMnTiH steel by combining processing map with microstructure

W. Feng, F. Qin & H. Long

Pages: 317-324

DOI: 10.1080/03019233.2016.1264145


Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition

Y. Rajshekar, J. Pal & T. Venugopalan

Pages: 325-334

DOI: 10.1080/03019233.2016.1264153


Use of physical modelling to study how to increase the production capacity by implementing a novel oblong AOD converter

P. Samuelsson, P. Ternstedt, A. Tilliander, A. Appell & P. G. Jönsson

Pages: 335-341

DOI: 10.1080/03019233.2016.1265785


Evaluation of surface tension of Ce-bearing slag based on calcium aluminate system

J. Qi, C. Liu & M. Jiang

Pages: 342-349

DOI: 10.1080/03019233.2016.1265804


Analysis of non-uniform thermal behaviour of special steel during slab continuous casting

F. Du, X. Wang, X. Han, J. Xu & M. Yao

Pages: 350-355

DOI: 10.1080/03019233.2016.1267933


Investigation of factors affecting drying characteristics of pellets made from iron-bearing converter sludge

H. Long, M. Bai, Y. Jia, D. Liang & S. Ren

Pages: 356-362

DOI: 10.1080/03019233.2016.1269039


Effects of basicity, MgO and MnO on mineralogical phases of CaO–FeOx–SiO2–P2O5 slag

Q. F. Shu & Y. Liu

Pages: 363-370

DOI: 10.1080/03019233.2016.1274463


Integrated finite element simulation and experiment verification of the large-sized straight welded pipe processing with JCOE technology

J. Luo, Y. Xue, H. Zhao, Y. Shang & C. Zhang

Pages: 371-378

DOI: 10.1080/03019233.2016.1274534


Experimental study on slag splashing of an 80 t combined blown converter

Z. Wang, Q. Liu, L. You, S. Wei & L. Cao

Pages: 379-385

DOI: 10.1080/03019233.2016.1274548


Control of sulphur for spring steel killed by Si–Mn and with low basicity slag

H. L. Yang, X. L. Wu, J. S. Ye, Y. Fang & X. B. Zhao

Pages: 386-392

DOI: 10.1080/03019233.2016.1274549