Practical Roll Pass Design

The Hot Rolling & Roll Pass Design of Steel Sections 

The course will identify steel products that are classified as Hot Rolled Sections and go on to describe the most common processes for their manufacture. The individual modules will explain how to construct the Roll Pass Designs for different groups of sections and some of the common practical challenges and solutions associated with their production.

Who is the course aimed at?

The course is aimed at:

  • Operators, supervisors, managers of hot rolling mills
  • Roll Pass Designers – to broaden their know-how
  • Interested academics
  • Anyone wanting to expand their industrial knowledge

What are the course requirements?

The following competencies will be assumed during the course.

  • Basic technical drawing – for example 2 Dimensional AutoCAD.
  • Basic understanding of ferrous metallurgy
  • The ability to use of simple spreadsheet functions -Excel will be used to demonstrate calculations

What is the course structure?

The course will run in eight, one hour online sessions. The first will be a FREE webinar to place the course in it’s industrial context and outline the structure and learning points in detail.

The sessions are therefore as follows:

Introduction to Section Mills & Roll Pass Design

Weatch ON DEMAND

This is the FREE session to give you an insight to the full course and if you are watching it live you can ask questions about any aspect of the full series

Full Course

1. Foundations of Rolling Theory & Roll Pass Design

Tuesday 16 June 16:00

This session will cover the fundamentals of rolling theory and practice that are common across all aspects of hot rolling and foundation aspects of Roll Pass Design for sections.

  • Rolling Theory & Terminology
  • Rolling methods and groove types
  • The anatomy of a shaped groove and common terms
  • Roll Pass Design as a Process
  • Drawing the groove - Construction

2. Rolling Angles

Thursday 18 June 16:00

This session will explain the rolling of angles

  • Products – aspects important to the Roll Designer
  • Feedstock Choice
  • Rolling methods & groove types
  • Groove construction

3. The Rolling of Beam Blanks (or “Dog Bones)

Tuesday 23 June 16:00

This session will explain the rolling of Beam Blanks and enable the Roll Designer to choose the optimum beam blank feedstock for a product range.

  • What is a Beam Blank
  • Aspects of the Beam Blank important to the Roll Designer
  • The Break-Down Mill (BDM)
  • Beam Blank limitations
  • Introducing the Leader Pass

4. Rolling Universal Beams – 1

Thursday 25 June 16:00

The rolling of universal beams will be covered in 2 sessions.

  • Universal H Shape products around the world – Standards & tolerances
  • Universal Rolling
  • Tandem Mills
  • Feedstock choice – Slab vs Bloom vs Beam Blank

5. Rolling Universal Beams - 2

Tuesday 30 June 16:00

  • Constructing the Leader Pass
  • Universal Rolls – Design
  • Universal rolling schedule calculations
  • Common problems & solutions

6. Rolling Channels

Thursday 2 July 16:00

This session will cover the rolling of taper and parallel flange channels

  • Product types & key points for the Roll Designer
  • Universal & Conventional Rolling
  • Groove design for channels
  • Common problems & solutions

7. Rolling Rails

Tuesday 7 July 16:00

This session will explore the rolling of rails from historical methods up to the most modern universal mill layouts.

  • Rail tolerances & product characteristics
  • Rail rolling methods
  • Feedstock choice
  • Groove design for rails

8. Rolling Sheet Piles

Thursday 9 July 16:00

This session will explore the rolling of sheet piles

  • Products - Sheet Pile types
  • Mill Layouts for Sheet Piles
  • Feedstock choice
  • Basics of groove design

What will it cost?

The first Webinar is FREE (Introduction to Section Mills & Roll Pass Design) so that you can find out if the course is right for you.

Each Webinar can be a stand alone session so you can register for one to eight sessions.  If you wish to take the full course then there would be a discount available.

Individual Webinar is £90 + vat for Non-Members, £75 + vat for Members. Full course is £649 for Non-Members, £549 for Members

What will I learn from these Webinars?

By the end of the course the attendees will be able to:

  • Understand how steel sections are rolled and the types of rolling mills that are used for different types of products
  • Identify different types of rolling process with their benefits and limitations
  • Choose the optimal feedstock for a product
  • Understand how the Roll Pass Designs are constructed for:
    • Angles
    • Universal Beams
    • Channels
    • Rails
    • Sheet Piles

How do I register?

Simply click on the relevant sessions to book the stand alone course or the full series.