Science and Technology of Welding and Joining, Vol. 22, No. 6

Bulk Metal Forming Committee
31 May 2017

Science and Technology of Welding and Joining, Vol. 22, No. 6, 18 Aug 2017 is now available online. IOM3 members have free access to the papers below via our journals page.e


Corrosion behaviour of friction-bit-joined and weld-bonded AA7075-T6/galvannealed DP980

Yong Chae Lim, Lile Squires, Tsung-Yu Pan, Michael Miles, Jong Kahk Keum, Guang-Ling Song, Yanli

Wang & Zhili Feng

Pages: 455-464

DOI: 10.1080/13621718.2016.1255404


Effect of pulsed ultrasonic on arc acoustic binding in pulsed ultrasonic wave-assisted pulsed gas tungsten arc welding

Jianfeng Wang, Qingjie Sun, Jinping Liu, Bin Wang & Jicai Feng

Pages: 465-471

DOI: 10.1080/13621718.2016.1258812


Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 aluminium alloy

Haibin Geng, Jinglong Li, Jiangtao Xiong & Xin Lin

Pages: 472-483

DOI: 10.1080/13621718.2016.1259031


In situ neutron diffraction measurement of strain relaxation in welds during heat treatment

Houman Alipooramirabad, Anna Paradowska, Olivier Lavigne, Reza Ghomashchi & Mark Reid

Pages: 484-495

DOI: 10.1080/13621718.2016.1263437


3D modelling of Ti–6Al–4V linear friction welds

Anthony R. McAndrew, Paul A. Colegrove, Bertrand C. D. Flipo & Clement Bühr

Pages: 496-504

DOI: 10.1080/13621718.2016.1263439


Influence of martensitic transformation on welding residual stress in plates and pipes

Xue Wang, Lei Hu, Qiang Xu, Dong-xu Chen & Song-tao Sun

Pages: 505-511

DOI: 10.1080/13621718.2016.1263711


Influence of Zn coating on friction stir spot welded magnesium-aluminium joint

R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu & Z. Y. Ma

Pages: 512-519

DOI: 10.1080/13621718.2016.1266735


An analytical model to calculate the peak temperature for friction stir welding

Jinwen Qian, Yan Ou, Jinglong Li, Yifeng Xiao, Liang Wu & Yanfei Xu

Pages: 520-525

DOI: 10.1080/13621718.2016.1268367


Friction stir welding of 25%SiC/2124Al composite with optimal mechanical properties and minimal tool wear

R. Fernández, J. Ibáñez, F. Cioffi, D. Verdera & G. González-Doncel

Pages: 526-535

DOI: 10.1080/13621718.2016.1268368


Influence of alloying elements on the mechanical properties of high-strength weld metal

Ronald Schnitzer, Dominik Zügner, Phillip Haslberger, Wolfgang Ernst &

Ernst Kozeschnik

Pages: 536-543

DOI: 10.1080/13621718.2016.1274095