Science and Technology of Welding and Joining, Vol. 21, No. 6, 17 Aug 2016

Bulk Metal Forming Committee
28 Jun 2016

Science and Technology of Welding and Joining, Vol. 21, No. 6, 17 Aug 2016 is now available online. Members can read for free via our journals page.


This new issue contains the following articles:


Interrelation of wettability–microstructure–tensile strength of lead-free Sn–Ag and Sn–Bi solder alloys

Wislei R. Osório & Amauri Garcia

Pages: 429-437

DOI: 10.1080/13621718.2015.1124176


Ferritic–austenitic stainless steels dissimilar resistance spot welds: metallurgical and failure characteristics

M. Pouranvari, M. Khorramifar & S. P. H. Marashi

Pages: 438-445

DOI: 10.1080/13621718.2015.1124491


A phase field investigation of dendrite morphology and solute distributions under transient conditions in an Al–Cu welding molten pool

L. Wang, Y. Wei, X. Zhan & F. Yu

Pages: 446-451

DOI: 10.1080/13621718.2015.1124504


On process–structure–property interconnection in anti-phase synchronised twin-wire GMAW of low carbon steel

S. Q. Moinuddin, A. Kapil, K. Kohama, A. Sharma, K. Ito & M. Tanaka

Pages: 452-459

DOI: 10.1080/13621718.2015.1124960


Effect of the axial external magnetic field on copper/aluminium arc weld joining

Y. B. Liu, Q. J. Sun, H. Wang, H. M. Zhang, S. J. Cai & J. C. Feng

Pages: 460-465

DOI: 10.1080/13621718.2015.1125406


Dissimilar Al/steel friction stir spot welding: To penetrate into the lower steel sheet or not?

E. Fereiduni, M. Movahedi & A. H. Kokabi

Pages: 466-472

DOI: 10.1080/13621718.2015.1125407


Distortion and residual stresses in electron beam-welded hydroelectric turbine materials

S. Sarafan, J.-B. Lévesque, P. Wanjara, J. Gholipour & H. Champliaud

Pages: 473-478

DOI: 10.1080/13621718.2015.1132127


Global and local mechanical properties and microstructure of Bobbin tool friction-stir-welded Al–Li alloy

F. F. Wang, W. Y. Li, J. Shen, Z. H. Zhang, J. L. Li & J. F. dos Santos

Pages: 479-483

DOI: 10.1080/13621718.2015.1132128


Effect of joint design on the failure behaviour of three-stack-up austenitic stainless steel resistance spot welds

Y. Zhang, Y. Li, Z. Luo, Y. Feng & J. Zhou

Pages: 484-492

DOI: 10.1080/13621718.2015.1135573


Microstructure and mechanical properties of Al-6061-T6 alloy welded by a new hybrid FSW/SSW joining process

M. Hajihashemi, M. Shamanian & B. Niroumand

Pages: 493-503

DOI: 10.1080/13621718.2015.1138019


Study on residual stress in socket weld by numerical simulation and experiment

H. Wang, H. Y. Jing, L. Zhao, Y. D. Han & L. Y. Xu

Pages: 504-514

DOI: 10.1080/13621718.2015.1118812