Powder Metallurgy, Vol. 61, No. 1

Particulate Engineering Committee
,
23 Jan 2018

Powder Metallurgy, Vol. 61, No. 1, 01 Jan 2018 is now available online. IOM3 members have free access to the papers below via our journals page.

 

Fabrication, microstructures and properties of 50 vol.-% SiCp/6061Al composites via a pressureless sintering technique

Xuezhi Mao, Yu Hong, Binhao Wang, Junwu Liu, Yujun Zhang, Dong Feng, Lei Yang, Changdong Shi, Yucheng Wu & Wenming Tang

Pages: 1-9

DOI: 10.1080/00325899.2017.1364895

 

From experimental data, the mechanics relationships describing the behaviour of four different low alloyed steel powders during uniaxial cold compaction

Ilaria Cristofolini, Alberto Molinari, Gianluca Pederzini & Alex Rambelli

Pages: 10-20

DOI: 10.1080/00325899.2017.1361507

 

Selective laser melting of P20 mould steel: investigation on the resultant microstructure, high-temperature hardness and corrosion resistance

H. X. Li, H. L. Qi, C. H. Song, Y. L. Li & M. Yan

Pages: 21-27

DOI: 10.1080/00325899.2017.1368965

 

Research on the preparation and shielding properties of W–Ni–Fe alloy material by liquid phase sintering

Tang Dewen, Zou Shuliang & Yan Liang

Pages: 28-35

DOI: 10.1080/00325899.2017.1376791

 

High-temperature flow behaviour modelling of stress–strain curves of the sintered Cu–28Zn pre-alloyed powder compacts considering dynamic recrystallisation

Rozita Rouzegar, Maziyar Azadbeh & Herbert Danninger

Pages: 36-42

DOI: 10.1080/00325899.2017.1377383

 

Wear-resistant iron-based Mn–Cu–Sn matrix for sintered diamond tools

Janusz Stefan Konstanty, Elzbieta Baczek, Andrzej Romanski & Dorota Tyrala

Pages: 43-49

DOI: 10.1080/00325899.2017.1379737

 

Microstructural behaviour of spark plasma sintered composites containing bimodal micro- and nano-sized Al2O3 particles

Behzad Sadeghi, Morteza Shamanian, Fakhreddin Ashrafizadeh, Pasquale Cavaliere, Mohsen Sanayei & Jerzy A. Szpunar

Pages: 50-63

DOI: 10.1080/00325899.2017.1391504

 

SPS-assisted Synthesis of SICp reinforced high entropy alloys: reactivity of SIC and effects of pre-mechanical alloying and post-annealing treatment

E. Colombini, M. Lassinantti Gualtieri, R. Rosa, F. Tarterini, M. Zadra, A. Casagrande & P. Veronesi

Pages: 64-72

DOI: 10.1080/00325899.2017.1393162

 

Preparation and printability of 24CrNiMo alloy steel powder for selective laser melting fabricating brake disc

Chaofan Shi, Suiyuan Chen, Qing Xia & Zhuang Li

Pages: 73-80

DOI: 10.1080/00325899.2017.1396019

 

Effects of TiB2/TiCx ratios on compression properties and abrasive wear resistance of in situ 50 vol.-% (TiB2–TiCx)/Al–Cu composites

Lei Wang, Feng Qiu, Delong Yang, Jingyuan Liu, Fang Chang & Qichuan Jiang

Pages: 81-87

DOI: 10.1080/00325899.2017.1400221