The Influence of Rolling and Forging on Product Quality and Properties
TUESDAY 17 JUNE
8.30 Registration and Coffee
10.00 CONFERENCE OPENS
Chairman: Dr Alan Partridge. President. Sheffield Metallurgical and Engineering Association.
Opening Address Technology Challenges for Advanced Power Generation
Dr Derek Allen. External Technology Manager, Alstom Power.
10.45 SESSION I PROCESS DEVELOPMENTS
Chairman: Mick Steeper, Manager Technology, Siemens VAI.
Cooling to Optimise Properties of Hot Rolled Steel.
Jean-François Noville. Senior Researcher, Julien Smal. Researcher and Jean-Claude Herman. Managing Director, CRM, Belgium.
Optimisation of Technologies for Hydro-Mechanical Descaling of Steel.
Jűrgen Frick. Director International Metallurgical Division, Lechler GmbH, Germany.
Development of the Scunthorpe Long Rail Rolling Process.
Simon Wright. Manager, Product & Process Development - Mills and Nigel Dransfield. Manager Libra Project, Corus Construction & Industrial.
Influence of Roll Lubrication and Roll Cooling on Product Quality.
Hugo Uijtdebroeks, Ms Dana Espinosa and Bart Vervaet. CRM, Gent, Belgium.
13.30 SESSION II PRODUCT QUALITY
Chairman: Dr John Wilkinson. Technical Manager, Product Development - Semis & Rods, Corus C&I.
Modelling of Stock Surface and Sub-Surface Layers in Hot Rolling.
Dr Michal Krzyzanowski. Research Fellow, IMMPETUS, University of Sheffield.
Investigation into Mechanisms of High Temperature Damage in Free Cutting Steels.
Dr Didier Farrugia. Scientific Fellow - Long Product Rolling Development, Corus RD&T.
Investments in Automotive Forging at Smethwick Drop Forge.
Mark Adams. Managing Director, Smethwick Drop Forge Ltd.
Safeguarding Flatness in Hot Rolled Products beyond the Mill.
Sebastien Maillard. Manager, Plate Mill Business Segment, Siemens VAI Clecim, France.
15.30 SESSION III STRUCTURE AND PROPERTIES - Rolled Products
Chairman: Dr Peter Morris. Research Fellow, Swinden Technology Centre, Corus RD&T.
Hot Rolled Dual Phase Steel
Peter J.Evans. Principal Scientist, Corus RD&T, Port Talbot.
New Ways to Make Plate - Asset and Process Trends around the World.
Mick Steeper. Technology Manager - Plate Mills, Siemens VAI.
Process Enhancement for Product Development: Capital Investment for Wire Rod at Scunthorpe.
Dr John Wilkinson. Technical Manager, Product Development - Semis & Rods, Corus Construction and Industrial.
Implementation of an Online Property Predictions System (OPPRESS). for Hot Strip Mill at Tata Steel.
Dr Sumitesh Das. Head of Materials Modelling and Product Design, Tata Steel, Jamshedpur, India.
SMEA CELEBRITY LECTURE
17.40 Coach to University House.
18.00 Interval Bar Open - Located in University House near The Auditorium.
19.00 CELEBRITY LECTURE - THE AUDITORIUM.
THE TATAS - ASPIRATION AND INNOVATION.
Dr Tridibesh Mukherjee. Group Director, Technology and Integration, Tata Steel - Corus.
Followed by a Buffet Supper - University House.
21.15 Coach to Endcliffe Conference Centre.
WEDNESDAY 18 JUNE
8.45 SESSION IV STRUCTURE AND PROPERTIES - Forgings
Chairman: Dr Alan Partridge. Chief Executive, National Metals Technology Centre.
Preform Development of Profiled Rings using DEFORM 3D.
Dr Roger Darlington, Dr Xuehua Xu and Dr Steven Court.
Modelling and Simulation Department, National Metals Technology Centre.
The Effect of Thermomechanical Processing on the Metallurgy of Titanium Alloys.
Dr Matthew Thomas. R&D Metallurgist, Timet UK.
Optimising Properties of Heavy Steel Forgings.
Dr Martin Kearney. Technical Director, Sheffield Forgemasters Engineering.
Advanced Modelling Techniques for Warm and Hot Forging Professor Jianguo Lin. Head of Mechanics of Materials Division,
Department of Mechanical Engineering, Imperial College London.
10.45 SESSION V NEW TECHNOLOGY
Chairman: Dr Didier Farrugia. Scientific Fellow, Swinden Technology, Corus RD&T.
Towards a Virtual Hot Forming - Product Design Chain.
Professor Yuan Chastel. Ecole des Mines de Paris, Centre for Material Forming -CEMEF, France.
The Development of Advanced Forging and Forming Techniques within the AFRC.
Professor Graham Wren. Advanced Forming Research Centre, University of Strathclyde.
An On-Line Transformation Detector for Improved Property Control in Rolled Steel Rod.
Dr Peter Morris. Research Fellow, Swinden Technology Centre, Corus RD&T and Professor Tony Peyton. School of Electrical & Electronic Engineering, University of Manchester.
Virtual Strip Production
Professor Gerhard Hirt. Director and Dr Martin Franzke. Chief Engineer, Institute of Metal Forming, RWTH Aachen, Germany
European Steel Response to World Challenges: The Strategic Agenda of ESTEP.
Dr Jean-Claude Charbonnier. Secretary General, ESTEP and Christian Marique. Director, CRM, Belgium.
13.15 Close Conference