The contents of the latest issue of this journal are listed below.

IOM3 members have free online access to this content. Please note you must be logged in to this site to access this page.

Non-members can see further information and a list of all issues of this journal on the Ingentaconnect site. A limited number of papers are available for free view. Other papers can be purchased on the Ingenta site.

This journal is published by Maney Publishing, Leeds, on behalf of the Institute of Materials, Minerals and Mining. Editorial and subscriptions information

Volume 28, Number 7, August 2012

Original Article

Protective coatings for enhanced performance in biomedical applications
pp. 473-479
Authors: Leonard, R L; Hasan, S A; Terekhov, A Y; Thompson, C; Erck, R A; Dickerson, J H; Johnson, J A

Microstructure characteristics and corrosion resistance of Ni-Co alloy coating prepared on AZ91D magnesium alloy
pp. 480-485
Authors: Yang, X K; Mu, X L; Xu, Z Q; Li, J N; Zhu, L; Zhang, S Y; Li, Ch; Wen, B W

Corrosion study of new surface treatment/coating for AZ31B magnesium alloy
pp. 486-490
Authors: Song, S; Shen, W D; Liu, M H; Song, G-L

Improvement to corrosion resistance of Ni-P coating on MAO magnesium alloy by BTESPT
pp. 491-497
Authors: Chen, M-A; Cheng, N; Li, J-M; Liu, S-Y

Residual stress in pulsed dc microarc oxidation treated AZ31 alloy
pp. 498-502
Authors: Gu, Y H; Chen, C-f; Bandopadhyay, S; Ning, C Y; Guo, Y J

Fabrication and characterisation of nickel coated Ni-NCZ (nickel coated ZrO2) composite coating
pp. 503-507
Authors: Arghavanian, R; Parvini Ahmadi, N; Yazdani, S; Bostani, B

Investigations on corrosion proceeding path and EIS of Ni-ZrO2 composite coating
pp. 508-512
Authors: Arghavanian, R; Ahmadi, N Parvini; Yazdani, S; Bostani, B

Microstructure and wear properties of laser processed Ni based amorphous matrix coatings
pp. 513-516
Authors: Li, R F; Li, Z G; Huang, J; Zhu, Y Y

Evaluation of TiB2 coatings in cold forming of aluminium
pp. 517-525
Authors: Heinrichs, J; Jacobson, S

Sol-gel derived hydroxyapatite coating on TiB2/TiB/Ti substrate
pp. 526-531
Authors: Esfahani, H; Dabir, F; Taheri, M; Sohrabi, N; Toroghinejad, M R

Surface modification of pure Ti with TiB2/Si3N4 reinforced coating
pp. 532-535
Authors: Liu, P; Zhang, Y B; Luo, H

Annealing effect on mechanical properties of Ta-Mo sputtered coatings
pp. 536-539
Authors: Ji, X; Mi, Y M; Zhou, X Y; Zhang, C M; Wang, F X

Annealing temperature effects on structural and magnetic properties of Ga1−xMnxN films
pp. 540-543
Authors: Hu, B; Man, B Y; Liu, M; Chen, C S; Gao, X G; Xu, S C; Wang, C C

Si-Mo-Cr coating for C/SiC coated carbon/carbon composites against oxidation
pp. 544-547
Authors: Zhang, Y.-L.; Li, H.-J.; Wang, P.-Y.; Li, K.-Z.; Zeng, X.-R.

Effect of Al on microstructure and impact property of surfacing repair layer of rail
pp. 548-553
Authors: Li, D; Gou, G Q; Liu, Y; Zhu, T H; Ji, H; Chen, H