The contents of the latest issue of this journal are listed below.

IOM3 members have free online access to this content. Please note you must be logged in to this site to access this page.

Non-members can see further information and a list of all issues of this journal on the Ingentaconnect site. A limited number of papers are available for free view. Other papers can be purchased on the Ingenta site.

This journal is published by Maney Publishing, Leeds, on behalf of the Institute of Materials, Minerals and Mining. Editorial and subscriptions information

Back to Particulate Engineering Committee

Volume 54, Number 5, December 2011 

News and views

pp. 551-553

Record attendance at Euro PM2011 in Barcelona
pp. 553-556
Author: Capus, Joseph

Restructuring of the global metal powder industry
pp. 557-558
Author: Dunkley, John

Original Articles

Microstructural characterisation of nickel rich areas and their influence on endurance limit of sintered steel
pp. 559-565
Authors: Bernier, F; Plamondon, P; Baïlon, J-P; L'Espérance, G

Improving pore morphology of PM 316L stainless steels by prealloyed powder prepassivation in 20% nitric acid
pp. 566-571
Authors: Shahabi Kargar, B; Babakhani, A; Moayed, M H

Synthesis of coral-like and spherical nickel nanoparticles using Taguchi L8 experimental design
pp. 572-576
Authors: Edrissi, M; Arabian Hosseinabadi, H; Zare Hajibagher, S

Characteristics of rapidly solidified Cu-10%Sn alloy powders produced by water jet cooled rotating disc atomisation
pp. 577-584
Authors: Öztürk, S; Öztürk, B; Usta, G

Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools
pp. 585-592
Authors: Albdiry, M T; Almosawi, A I

Liquid phase sintering, heat treatment and properties of ultrahigh carbon steels
pp. 592-598
Authors: Abosbaia, A A S; Mitchell, S C; Youseffi, M; Wronski, A S

Fabrication and characterisation of powder metallurgy parts having porosity gradient
pp. 599-603
Authors: Bender, S; El Wakil, S D; Chalivendra, V B

Microstructural investigation of as cast and PREP atomised Ti-6Al-4V alloy
pp. 604-607
Authors: Yamanoglu, R; German, R M; Karagoz, S; Bradbury, W L; Zeren, M; Li, W; Olevsky, E A

Constitutive model for powders with characterisation of low pressure region of yield surface
pp. 608-613
Authors: Rolland, S A; Gethin, D T; Lewis, R W; Tweed, J H

Interface formation and diffusion of alloying elements during cosintering of MIM 316L/17-4PH stainless steel parts: experiments and simulation
pp. 614-619
Authors: Benedet Dutra, G; Mulser, M; Petzoldt, F

Synthesis and properties of Cu-Al-Ni shape memory alloy strips prepared via hot densification rolling of powder preforms
pp. 620-627
Authors: Sharma, M; Vajpai, S K; Dube, R K

Processing and properties of sinter hardened Fe-Cr-Mo steels with admixed extra-fine nickel
pp. 628-635
Authors: Gauthier, M; Metcalfe, S; Pelletier, S; Stephenson, T F