The contents of the latest issue of this journal are listed below.

IOM3 members have free online access to this content. Please note you must be logged in to this site to access this page.

Non-members can see further information and a list of all issues of this journal on the Ingentaconnect site. A limited number of papers are available for free view. Other papers can be purchased on the Ingenta site.

This journal is published by Maney Publishing, Leeds, on behalf of the Institute of Materials, Minerals and Mining. Editorial and subscriptions information

Volume 26, Number 5, November 2011

In brief
pp. 207-214(8)

Original Articles

Investigation of sol-gel preparation procedure for DAG powder
pp. 215-218
Authors: Wei, M; Chen, S-O; Shao, W-Q; Jiang, X-J; Li, D; Sun, R-F; Zhang, Z

Synthesis of mullite whiskers in sodium sulphate flux using silica fume and aluminium sulphate as starting materials
pp. 219-221
Author: Tan, H B

High surface area activated carbon prepared from agricultural biomass: empty fruit bunch (EFB), bamboo stem and coconut shells by chemical activation with H3PO4
pp. 222-228
Authors: Firoozian, P; Bhat, Irshad ul Haq; Abdul Khalil, H P S; Noor, Ahmad Md; Akil, Hazizan Md; Bhat, A H

Non-destructive determination of titanocene dichloride in composite electrospun fibres by diffuse reflectance UV-vis spectroscopy
pp. 229-231
Authors: Yang, X-H; Chen, P; Wu, Q-S

Preparation of LiFePO4 rods, LiFePO4/graphene composite and their electrochemical performances
pp. 232-235
Authors: Zhao, N; Gao, X W; Chen, F; Liu, C; Cao, L; Zang, C L; Cheng, X N; Yang, J

Inorganic nanomaterial applications in cancer detection
pp. 236-242
Authors: Wang, B Q; Xia, C H; Lv, Y; Gao, G G; Wu, H

Molar ratio mixture design for optimising compressive strength of kaolinitic cement
pp. 243-250
Authors: Hwang, C L; Kuo, C K; Wang, E H

Cavitation erosion characteristics of TiC reinforced metal matrix composite layer fabricated by plasma cladding pp. 251-256
Authors: Wu, Y P; Zhang, J F; Li, G Y; Hong, S; He, Z H

Tensile fracture behaviour of 7072/SiCp metal matrix composites fabricated by gravity die casting process
pp. 257-262
Author: Reddy, A C

Effect of compaction pressure and tempering on densification, microstructural evolution, mechanical properties, wear and machinability response of sinter hardened Ancorsteel 4300-0·6Gr
pp. 263-270
Authors: Hadas, S; Raja Annamalai, A; Upadhyaya, A