The contents of the latest issue of this journal are listed below.

IOM3 members have free online access to this content. Please note you must be logged in to this site to access this page.

Non-members can see further information and a list of all issues of this journal on the Ingentaconnect site. A limited number of papers are available for free view. Other papers can be purchased on the Ingenta site.

This journal is published by Maney Publishing, Leeds, on behalf of the Institute of Materials, Minerals and Mining. Editorial and subscriptions information

Literature Review

Extremely thin absorber solar cells based on nanostructured semiconductors
pp. 1741-1756
Authors: Briscoe, J; Dunn, S

Review

Oxide bifilms in aluminium alloy castings - a review
pp. 1757-1769
Authors: Gopalan, R; Prabhu, Narayan K

Original Article

Mechanical properties of Nb based multiphase alloy studied by nanoindentation and atomic force microscopy
pp. 1770-1776
Authors: Wei, W Q; Wang, H W; Zou, C M; Zhu, Z J; Wei, Z J

Microscopy of heat treated titanium alloy BT16
pp. 1777-1782
Authors: Wu, G Q; Song, H; Sha, W; Zhang, Z G

Effects of spiral geometries on grain selection during casting of single crystal superalloys
pp. 1783-1787
Authors: Gao, S F; Liu, L; Zhao, X B; Huang, T W; Zhang, J; Fu, H Z

Microstructure and mechanical properties of in situ synthesised (TiC+TiB)/Ti-6Al-4V composites prepared by powder metallurgy
pp. 1788-1792
Authors: Zhou, P; Qin, J N; Lu, W J; Zhang, D

Effect of annealing on tensile properties of electrodeposited nanocrystalline Ni with broad grain size distribution
pp. 1793-1797
Authors: Zheng, Y D; Dai, P Q; Xu, W C; Hu, S R

Molecular dynamics investigation of temperature dependent structural and fracture properties of amorphous silicon nitride
pp. 1798-1801
Authors: Liao, N B; Xue, W; Zhang, M

Effect of integrated extrusion-equal channel angular pressing temperature on microstructural characteristics of low carbon steel
pp. 1802-1808
Authors: Shaban, M Ghazani; Eghbali, B

Magnetic pulse welding of Al to Mg alloys: structural-mechanical properties of the interfacial layer
pp. 1809-1813
Authors: Stern, A; Aizenshtein, M

Strain driven grain boundary sliding and/or rotation during tensile deformation of ultrafine grained C-Mn steel
pp. 1814-1818
Authors: Du, L X; Yao, S J; Zhou, M; Wang, G D

Tool life model for Al2O3 particle reinforced MMCs using genetic expression programming
pp. 1819-1827
Authors: Kök, M; Kanca, E; Eyercioğlu, Ö

Microstructural investigation on strengthening mechanisms of AISI 304L austenitic stainless steel during cryogenic deformation
pp. 1828-1832
Authors: Behjati, P; Najafizadeh, A; Kermanpur, A

Microstructural evaluation of melt conditioned twin roll cast Al-Mg alloy
pp. 1833-1839
Authors: Kumar, S; Hari Babu, N; Scamans, G M; Fan, Z

Effect of multicomponent modifier on microstructure and mechanical properties of high Ni-Cr-Mo cast iron
pp. 1840-1845
Authors: Dun, X L; Liu, K P; Liu, H S; Lai, J P; Fu, X H; Zhou, J

Improved halide salt process to produce Al-B master alloys
pp. 1846-1850
Author: Birol, Y

Extrusion of EN AW-2014 alloy in semisolid state
pp. 1851-1857
Authors: Birol, Y; Guven, E A; Capan, L J

Microstructural characterisation of deformation behaviour of nickel base superalloy IN625
pp. 1858-1862
Authors: Behjati, P; Asgari, S

Short Communication

Approximations in using solubility products for B, N, Ti and Al
pp. 1863-1868
Author: Khare, S