The contents of the latest issue of this journal are listed below.

IOM3 members have free online access to this content. Please note you must be logged in to this site to access this page.

Non-members can see further information and a list of all issues of this journal on the Ingentaconnect site. A limited number of papers are available for free view. Other papers can be purchased on the Ingenta site.

This journal is published by Maney Publishing, Leeds, on behalf of the Institute of Materials, Minerals and Mining. Editorial and subscriptions information

Volume 37, Number 2, February 2010

Articles

Development of green suspension ironmaking technology based on hydrogen reduction of iron oxide concentrate: rate measurements
pp. 81-88(8)
Authors: Choi, M.E.; Sohn, H.Y.

Numerical analysis of isothermal flow in lower part of blast furnace considering effect of cohesive zone
pp. 89-97(9)
Authors: Jin, H.J.; Choi, S.

Tuyere failure analysis in Corex process
pp. 98-102(5)
Authors: Barman, S.C.; Kumar, P. Prachethan; Uddar, L.; Mahapatra, P.C.; Sekhar, V.R.; Ranjan, M.

Effect of manganese ore blends on performance of submerged arc furnace for ferromanganese production
pp. 103-111(9)
Authors: Tathavadkar, V.; Singh, V.; Mishra, P.K.; Mallick, P.; Nanda, B.D.

Mould lubrication and friction behaviour with hydraulic oscillators in slab continuous casting
pp. 112-118(7)
Authors: Ma, Y.; Wang, X.D.; Zang, X.Y.; Yao, M.; Zhang, L.; Ye, S.H.

Fine tuning straightening process using genetic algorithms and finite element methods
pp. 119-125(7)
Authors: Pernía, A.; Martínez-de-Pisón, F.J.; Ordieres, J.; Alba, F.; Blanco, J.

Modelling and control of coiling entry temperature using interval type-2 fuzzy logic systems
pp. 126-134(9)
Authors: Méndez, G.M.; Leduc-Lezama, L.; Colás, R.; Murillo-Perez, G.; Ramirez-Cuellar, J.; López, J.J.

Monitoring microstructure changes in rod online by using induction spectroscopy
pp. 135-139(5)
Authors: Peyton, A.J.; Yin, W.; Dickinson, S.J.; Davis, C.L.; Strangwood, M.; Hao, X.; Douglas, A.J.; Morris, P.F.

Characteristics of solute segregation in continuous casting bloom with dynamic soft reduction and determination of soft reduction zone
pp. 140-146(7)
Authors: Luo, S.; Zhu, M.Y.; Ji, C.; Chen, Y.

Optimisation of continuous casting process parameters based on coupled heat and stress model
pp. 147-154(8)
Authors: Chen, W.; Zhang, Y.-Z.; Wang, B.-X.

Investigation into dynamic strain aging behaviour in high carbon steel
pp. 155-160(6)
Authors: Kohandehghan, A.R.; Sadeghi, A.R.; Akhgar, J.M.; Serajzadeh, S.